Sms (Short Message Service); Setting Up Sms; Sending A Message - Panasonic KX-PRW110BX Operating Instructions Manual

SMS (Short Message Service)

Setting up SMS

SMS allows you to send and receive text
messages.
Important:
R To use SMS features, you must:
– subscribe to a Caller ID and/or an
appropriate service such as SMS.
– confirm that SMS is turned on.
– confirm that the correct message centre
numbers are stored.
Contact your service provider/telephone
company for details and availability.
Note:
R A total of 22 messages (at 160 characters/
message) can be saved. Total number may
be more than 22 if length of messages is
less than 160 characters/message.
R If the unit is connected to a PBX system,
you may not be able to use SMS features.
Turning SMS on/off
The default setting is "Off".
1
MMenuN (right soft key) #357
2
MbN: Select the desired setting. a MOKN
a M N
Storing SMS message centre
numbers
SMS message centre numbers must be
stored in order to send and receive SMS
messages. Contact your service provider/
telephone company for more information.
1
To store "Message Centre1":
MMenuN (right soft key) #351
To store "Message Centre2":
MMenuN (right soft key) #352
2
Edit the number as necessary. a MOKN
a M N
Note:
R For PBX users:
– You need to add the PBX line access
number and a dialling pause to the
36
PRW110BX_UE_(en-en)_1120_ver043.pdf 36
beginning of the Message Centre 1
number.
– If you only use the Message Centre 1
number for SMS, store the Message
Centre 1 number as is (without adding a
line access number or dialling pause) to
Message Centre 2.

Sending a message

Writing and sending a new
message
1
MMenuN (right soft key) a
2
MbN: "Create" a MOKN
3
Enter a message. a MOKN
R You can change the character entry
mode by pressing MR/ECON
(page 42).
4
Enter the destination phone number (20
digits max.). a MOKN 2 times
R You can also set the phone number:
– from the redial list by pressing MTN.
– from the caller list by pressing M N.
– from the phonebook by pressing
MWN.
5
To save the message, select "Yes". a
MOKN
6
To send the message, press MOKN.
Note:
R This unit supports SMS messages of up to
612 characters, however, the maximum
number of characters you can send or
receive may be limited by your SMS service
provider/telephone company. Contact your
SMS service provider/telephone company
for details.
R If your message contains over 160
characters, the message is a long message
and "IILong TextII" is displayed. Your
service provider/telephone company may
treat long messages differently from other
messages. Contact your service provider/
telephone company for details.
R If your phone is connected to a PBX, store
the PBX line access number (page 37).
a MOKN
11/20/2013 1:50:57 PM