Table of Contents
Advertisement
Turn on the DV equipment and
pause play at the point you want
to start recording.
"DV Auto Rec" screen may appear.
DV Auto Rec
DV unit is connected.
Record from the DV unit ?
Rec to DVD
SELECT
OK
When "DV Auto Rec" screen does not appear
Perform steps
–
(➔ 26, Recording from a DV Camcorder)
1. With the unit stopped
Press [FUNCTION MENU].
2. Press [ e , r ] to select "To Others", then press [OK].
3. Press [ e , r ] to select "DV Auto Rec", then press [OK].
You can proceed to step
(➔ below).
w to select "Rec to DVD", then
w to select "Rec", then
Notes
•
Only one piece of DV equipment (e.g., digital video camcorder) can
be connected to the unit via the DV input terminal.
•
When timer recording starts while recording from an external
device, timer recording takes priority and recording from the
external device stops.
•
If the desired audio is not recorded, select the kind of audio for
"Audio Mode for DV Input" in the Setup menu (➔ 53).
•
Programmes are recorded as a single item; breaks in the
RAM
images create chapters and playlists are created automatically.
•
Depending on the DV equipment, the images or audio may not be
input properly.
•
The DV input on this unit is for use with DV equipment only.
(It cannot be connected to a computer, etc.)
•
If you use video camcorders from other manufacturers, these are
not guaranteed to work.
•
It is not possible to operate the unit from the connected DV
equipment.
•
The DV equipment name may not be shown correctly.
•
Date and time information is not recorded, even if displayed on the
camcorder.
•
You cannot record and play at the same time.
Tips
When recording finishes
The confirmation screen appears.
Press [OK] to finish DV camcorder recording.
To stop recording
Press [■ STOP].
The confirmation screen appears. Press [OK].
If the DV camcorder recording function does not work properly, check
the connections and DV equipment settings, and turn the unit off and
back on. If that does not work, follow the instructions of "Recording
from a VCR, etc." (➔ 26).
Cancel
RETURN
Advanced Timer Recording
RAM -R -R DL -RW(V) +R +R DL +RW
Manual timer recordings
Preparation:
• Turn on the television and select the appropriate
video input to suit the connections to this unit.
•
If the disc is protected, release protection
RAM
(➔ 48).
• Insert a disc with enough remaining blank space.
• Confirm that the clock on the unit's display is set to
the correct time.
• If connected via a satellite receiver, set channel
there before timer recording starts.
e , r to select "New Timer
Programme", then
w , q to move through the items
and e , r to set the items.
Timer
Remain 1:54 SP
Recording
THU 21/02/08 18:45:15
Name
Date
Start Stop
Mode STTL
--/-- --- --:-- --:--
---
SP
AllServices : -----
Programme Name
Please set Channel.
OK
Change
--
Number
0
9
RETURN
Profile
Name:
–
TV Station Name/External Input
•
When recording satellite
programmes, select "AV2".
•
You can press the "Blue" button to
change the category.
[e.g., Free Services, Radio,
Registered Profiles (➔ 50, Edit
Profiles)]
Date:
–
You can set a daily or weekly
programme (➔ 28, Tips).
Start (start time) / Stop (end time):
–
Hold button to change in 30-minute
increments or decrements.
Mode:
–
Recording mode (➔ 22)
STTL [Subtitles (➔ 36)]:
–
ON/OFF
Programme Name:
Press [OK]. (➔ 40, Entering Text)
(continued on the next page)
Timer
Remain 1:54 SP
Recording
THU 21/02/08 18:45:15
Drive
No. Name
Date Start Stop Mode STTL
space
NewTimer Programme
Press OK to store newprogramme.
OK
RETURN
27
RQT9118
Advertisement
Table of Contents
