Additional Connections; Adding A Vcr: Connecting To A Television And A Video Cassette Recorder - Panasonic Diga DMR-EZ28EB Operating Instructions Manual

Additional Connections

Using a fully wired 21-pin Scart cable
– You can use a variety of Q Link functions by connecting the unit to a Q Link compatible television (➔ 38).
– You can enjoy high-quality viewing by connecting the unit to an RGB compatible television.
"AV1 Output" in the Setup menu is set to "RGB 1 (without component)" or "RGB 2 (without component)" (➔ 55)
– "AV2 Input" settings in the Setup menu (➔ 55)
Use of the RF coaxial cable
• Keep the RF coaxial cables as far away as possible from other cables.
• Do not roll up the RF coaxial cables.
Before connection, turn off the mains for all connected equipment and read the appropriate operating instructions.
Be sure to read the Caution for AC Mains Lead on page 3.

Adding a VCR: Connecting to a Television and a Video Cassette Recorder

To the aerial
RF coaxial cable
(supplied)
The RF coaxial cable cannot
be used for showing pictures
from the unit. The unit must
be connected by another
method, e.g. 21-pin Scart
cable to show pictures from
the unit on the television set.
After completing the above connections, proceed to the TV Tuning (➔ 11).
To recording from a VCR
Refer to "Recording from an External Device" (➔ 26).
58
RQT9118
Rear of TV
RF IN
RF coaxial cable
(not supplied)
AV1
TV)
COMPONENT
AV2(EXT)
VIDEO OUT
Rear of this unit
RF IN RF OUT AV OUT
Rear of VCR
AV
21-pin Scart cable
(not supplied)
AV OUT
21-pin
Scart cable
(not supplied)
To household mains socket
To household
mains socket
To household mains socket
AC mains lead
(supplied)