Sound; Display - Panasonic Diga DMR-EZ25EB Operating Instructions Manual

FUNCTIONS
/ To Others
Dynamic Range Compression
Setup
Bilingual Audio Selection
Tuning
Digital Audio Output
Disc
Audiomode for XP Recording
Picture
Audiomode for DV Input

Sound

Display

Connection
Others
SELECT
ENTER
Setup
Digital Audio Output
PCM-Down Conversion
Tuning
Dolby Digital
Disc
DTS
Picture
MPEG
Sound
Display
Connection
Dolby Digital
Others
Bitstream
PCM
DVB Preferred Subtitle
Setup
On-Screen Messages
Grey Background
Tuning
Disc FL Display
Picture
New Services Messages
Sound
Display
Connection
TAB
Others
Setup
Sound
Off
M1
Dynamic Range Compression
Dolby Digital
On: The level of quieter passages increases and the level of louder passages
Stereo 1
decreases. The audio can be clearly understood even when the volume is lowered.
Bilingual Audio Selection
TAB
If you want to record programmes that are broadcast in dual-channel sound, you can
RETURN
select between the original language [M1] or another available language [M2]. If you
are copying from an external source or from a tape position, select the sound track on
the other unit.
Off
Bitstream
Digital Audio Output
Bitstream
PCM
Select the appropriate setting if you have connected an external unit to the
DIGITAL AUDIO OUT of the DVD Recorder.
PCM Down Conversion
Select the audio output mode for a scan frequency of 96 kHz or 88.2 kHz. Despite this
setting, signals are converted to 48 kHz or 44.1 kHz if they have a scan frequency over
96 kHz or 88.2 kHz or if the disc is copy-protected.
On: The connected unit cannot process signals with a scan frequency of 96 kHz or
88.2 kHz. Signals are converted with 48 kHz or 44.1 kHz.
Off: The connected unit can process signals with a scan frequency of 96 kHz or 88.2
kHz. Signals are output as 96 kHz or 88.2 kHz.
Dolby Digital, DTS, MPEG
Bitstream: The connected unit can decode the corresponding signal.
PCM: If the connected unit cannot decode the corresponding signal, the setting must be
changed to [PCM]. Otherwise, the loud noise can lead to damage to your hearing or
loudspeaker. Make the necessary changes depending on your audio system.
Audio Mode for XP Recording
Choosing the audio type when recording in XP mode. The picture quality of LPCM
recordings may possibly be poorer than normal recordings in XP mode
Audio Mode for DV Input
Select the audio type when copying from the DV input.
Stereo 1: Original sound; Stereo 2: Voice-over, Mix: Original sound + voice-over
Display
DVB Preferred Subtitle
Subtitle language for digital programmes (standard or for the hard-of-hearing).
English
On-Screen Messages
5 sec.
Select the time for screen displays.
On
Off: T he screens are not shown on changing the station
Bright
Automatic
Grey Background
the grey background is displayed when there is no analogue TV reception
On:
SELECT
FL Display
RETURN
Changes the brightness of the display on the unit.
New Service Messages
Off: The Service Messages are not shown.
Setting
ENTER
DVD-V
-R -RW(V) +R +RW
-R DL +R DL
-R +R
-R DL -RW(V)
+R DL +RW
Setting Option
ENTER
Option
[On] [Off] (Dolby Digital Only)
[M 1] [M 2]
[PCM Down Conversion]
[Dolby Digital] [DTS] [MPEG]
[On] [Off]
[Bitstream] [PCM]
[Dolby Digital] [LPCM]
[Stereo 1] [Stereo 2] [Mix]
[English] [Welsh] [Gaelic]
[Off] [3 sec.] [5 sec.] [7 sec.] [10 sec.]
.
[On] [Off]
[Bright] [Dim]
[Automatic] [Off]
ENTER
ENTER
.
43