Tuning - Panasonic Diga DMR-EZ25EB Operating Instructions Manual

FUNCTIONS
/ To Others
Auto-Setup Restart
Warning--all stored tuning data
will be lost !
Do you want to proceed ?
Yes
Add New DVB Service
Finished
Ch 21
Prog. Channel Service Name Net ID TS ID
1 BBC 1
47 12306
2 47 BBC 2 12306
2 new services found.
ENTER
RETURN
2 BBC 2W DVB CH30
Signal Quality 0
Signal Strength 0
RETURN
40
Setup

Tuning

Auto-Setup Restart
Select [Yes] with
To cancel the process, select [No] with
Press RETURN to prematurely end the station search.
No
Press RETURN to prematurely end the station search. All station settings and all
created profiles are deleted.
Tuning
68
Add New DVB Service
Quality
The unit looks for new digital stations. The station search is automatic.
11398 8
11398 8
The bar over the table shows you the search progress. At the end of the search, the
number of found new digital stations appears.
Press RETURN to stop the station search prematurely.
The channels found before stopping are not saved.
Tuning
Signal Condition
The display in the [Signal Condition] menu shows the quality and strength of
the selected digital station.
10
You can select and check the stations consecutively with CH .
10
The Signal Quality is only displayed for digital stations.
CH +
CH –
Signal Quality
Display red: signal quality below 2: the signal quality is poor so that there may be
interference in the pictures and sound.
Display orange; signal quality 2-5: the signal quality is basically adequate, but brief
interference in the pictures and sound is possible in isolated cases.
Display green; signal quality over 5: optimum picture and sound quality.
Signal Strength
The display for signal strength is grey. 0 means signal strength = 0 %, 10 means
signal strength = 100%.
The signal strength can also be >100 % (> 10). In this case, the display is red.
Auto-Setup Restart
and confirm with ENTER. The station search begins.
and confirm with ENTER or press RETURN.
Add New DVB Service
Signal Condition
ENTER
ENTER
ENTER
69