Panasonic KX-TG8200E Operating Instructions Manual page 52

TG8200_20E.book Page 52 Monday, June 18, 2007 9:03 AM
Useful Information
Problem Cause & solution
I cannot operate the L The base unit or another handset is being used. Wait
answering system with
the handset.
L A caller is leaving a message. Wait for the caller to
L The handset is too far from the base unit. Move closer.
When I try to operate L Another handset is being used. Wait for the other user
the answering system
with the base unit, the
L A caller is leaving a message. Wait for the caller to
answer on indicator on
the base unit flashes
for a few seconds and I
cannot operate the
answering system.
I cannot operate the L You are entering the wrong remote access code. If you
answering system
remotely.
L Press each key firmly.
L The answering system is turned off. Turn it on
L You are using a rotary/pulse telephone. Try again
While recording a L A call is being received. Answer the call and try again
greeting message or
listening to messages,
the unit rings and
recording stops.
For DSL users
We recommend connecting a filter (contact your DSL service provider) to the
telephone line between the base unit and the telephone line jack.
52
Helpline Tel. No.: U.K. 0844 844 3898 R.O.I. 01289 8333
for the other user to finish.
finish.
to finish.
finish.
forget the remote access code, store a new remote
access code (page 36).
(page 37).
using a touch-tone phone.
later.