Base Unit Settings; ("Off") *4 - Panasonic KX-TG8200E Operating Instructions Manual

TG8200_20E.book Page 24 Monday, June 18, 2007 9:03 AM

Base Unit Settings

|
Base unit settings
To customise the base unit using the handset:
1
" (centre of joystick)
2
Select | by pushing the joystick in any direction. i #
3
Push the joystick up or down to select the desired item in the base unit settings
menu. i #
4
Push the joystick up or down to select the desired item in the sub-menu. i #
5
Push the joystick up or down to select the desired setting then press #.
L This step may vary depending on the feature being programmed.
L To exit the operation, press {ih}.
Note:
L The current item or setting is highlighted on the display.
Menu Sub-menu
*1
Ringer Volume
Call Options Recall/Flash
Call Restrict
Other Options Base Unit PIN
Repeater Mode
*1 KX-TG8220/KX-TG8222
*2 Change the recall time, if necessary, depending on the requirements of your
service provider/telephone company or PBX.
*3 If you change the PIN, please make note of your new PIN. The unit will not reveal
the PIN to you.
*4 If you forget your PIN, see page 50.
24
Helpline Tel. No.: U.K. 0844 844 3898 R.O.I. 01289 8333
Details (default setting)
— For base unit (Medium)
Recall time ("100 msec.")
page 25
Change base unit PIN ("0000").
– Enter the current 4-digit base
*4
unit PIN.
– Enter the new 4-digit base unit
PIN. i # i {ih}
("Off"): page 42
*2
*3