C Making/Answering Calls; Making Calls - Panasonic KX-TG8200E Operating Instructions Manual

TG8200_20E.book Page 14 Monday, June 18, 2007 9:03 AM
Making/Answering Calls
C

Making calls

1
Lift the handset and dial the phone
number.
L To correct a digit, press {C/T}.
2
{C}
3
When finished talking, press {ih}
or place the handset on the base
unit or charger.
Speakerphone
1
During a conversation, press {s} to
turn on the speakerphone.
L Speak alternately with the caller.
2
When finished talking, press
{ih}.
Note:
L For best performance, use the
speakerphone in a quiet environment.
L To switch back to the receiver, press
{C}.
Adjusting the receiver or speaker
volume
Push the joystick up or down while on a
call.
Making a call using the redial
list
The last 10 phone numbers dialled are
stored in the redial list (each 24 digits
max.).
1
j (right soft key)
2
{^}/{V}: Select the desired number.
3
{C} / {s}
L If {s} is pressed and the other
party's line is engaged, the unit
will automatically redial multiple
times. To cancel, press {ih}.
14
Helpline Tel. No.: U.K. 0844 844 3898 R.O.I. 01289 8333
Editing/erasing/storing
1
j (right soft key)
2
{^}/{V}: Select the desired number.
i "
3
Proceed with the desired operation.
■ Editing a number before calling
it:
{^}/{V}: "Edit and Call" i
# i Use the joystick to move
the cursor. i Edit the number.
i {C}
■ Erasing numbers:
{^}/{V}: "Erase" or "Erase
All" i # i
{^}/{V}: "Yes" i # i
{ih}
■ Storing a number into the
handset phonebook:
{^}/{V}: "Add Phonebook" i
# i Enter a name (16
characters max.; page 44). i
# i Edit the phone number if
necessary. i # i
{^}/{V}: Select the desired
category (page 17). i # i
{^}/{V}: "Save" i # i
{ih}
Note:
L When editing:
– To erase a number, place the cursor
on the number, then press {C/T}.
– To insert a number, place the cursor
to the right of where you want to
insert the number, then press the
appropriate dial key.
Pause (for PBX/long distance
service users)
A pause is sometimes required when
making calls using a PBX or long
distance service.
Example: If you have to dial {0} before
dialling outside numbers manually, you