Specifications; General Safety Rules; Work Area - Central Pneumatic 90385 Assembly And Operating Instructions Manual

Power Consumption
Motor
Pump
Tank
Air Outlet Size
Pressure Gauge
SCFM
Features
Weight
THIS COMPRESSOR MUST BE OPERATED ON A MINIMUM 15 AMP CIRCUIT.
You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.
READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instruc-
tions listed below may result in electric shock, fire, and/or serious injury.
1. Keep your work area clean and well lit. Cluttered benches and dark areas invite
accidents.
2. Do not operate power tools in explosive atmospheres, such as in the presence
of flammable liquids, gases, or dust. Power tools create sparks which may ignite
the dust or fumes.
3. Keep bystanders, children, animals and visitors away while operating a power
tool.
Distractions can cause you to lose control. Protect others in the work area from
debris such as chips and sparks. Provide barriers or shields as needed.
SKU 90385 For technical questions, please call 1-800-444-3353.

SPECIFICATIONS

Item
120 VAC, 60 Hz
2.5 HP (rated), 3400 RPM; 2 capacitor motor
Single stage, oil lubrication
8 gallon capacity; Cut-in pressure: 90 PSI, Cut-
out pressure: 120 PSI
1/4 Inch - 18 NPT
0 ~ 200 PSI (CSA approved)
4.5 SCFM @ 115 PSI, 5.6 SCFM @ 90 PSI, 6.2
SCFM @70 PSI, and 7.25 SCFM @ 40 PSI
Overload protection
Clear view oil window
65 lbs.
SAVE THIS MANUAL

GENERAL SAFETY RULES

WARNING!
SAVE THESE INSTRUCTIONS

Work Area

Description
4 STL
REV 12/03;07/04;11/04
Page 2