Table of Contents
Advertisement
AUTO TUNE
Before AUTO TUNE, set the "CH SELECT" and "SYS SELECT".
Follow the step on the previous page to display the TUNING MENU screen.
1
Notes:
• If you proceed with the next step all tuning data will be erased (all stations
and their programme positions stored in your TV's memory will be wiped out
so that the new settings can be stored).
• If you exit the procedure after this point and before AUTO TUNE is
complete, no station information will be stored. Restart and complete
the AUTO TUNE procedure so that the TV is re-tuned.
2
Once this operation is completed the TV will display the program now
stored on programme position 1.
TV/AV
Press at any time to go back to watching TV (please read
the Note in the above procedure).
AUTO TUNE (via side panel)
It is also possible to use the control panel buttons on the side of the TV to tune individual programme positions.
Helpful Hint
1. If a clear picture with correct colours cannot be obtained when a Broadcast or AV signal is received, refer to the "Colour System
Selection" operation on page 14.
2. After the Automatic tune is finished, press the Programme Number "Up" Button to confirm the tuning condition for each Programme
Number. If some Programme Numbers are unused, it is possible to skip such Programme Numbers. Please refer to the Programme skip
function on page 14.
Press to select AUTO TUNE.
Press to access AUTO TUNE.
Press to start AUTO TUNE.
1
Press
2
Press
3
Press
4
Press
Press
(Side panel) until Tuning mode is reached.
or
to access Tuning mode.
(Side panel) to access Auto tune.
or
to start search.
at any time to exit the Tuning menu.
TUNING MENU
TUNING MENU
DIRECT
CH SELECT
SYS SELECT
ASIA/M. EAST
AUTO TUNE
ACCESS
MANUAL TUNE
SOUND SYS
5.5MHz
COLOUR SYS
AUTO
FINE TUNE
SKIP
OFF
29
CH 29
AUTO SETUP IN PROGRESS
SEARCHING :
STORED CH29
SETUP : RETURN TO TUNING MENU
TV/AV : TO EXIT
15
Advertisement
Table of Contents
