Changing The Player Settings - Panasonic DVD-S325 Operating Instructions Manual

Changing the player settings

1
Shows Setup menu.
•
The settings remain intact even if you switch the unit to standby.
•
Underlined items are the factory preset.
"DISC" tab
n
SETTING STATE
AUDIO
Choose the audio language.
SUBTITLE
Choose the subtitle language.
MENUS
Choose the language for
disc menus.
RATINGS
Set a ratings level to limit
DVD-Video play.
PASSWORD
Change the password for
"RATINGS" (è above).
16
2
Select
Register
Select the tab.
Display the current setting of the items below
ENGLISH (LANGUAGE OPTIONS)
OTHER ----
]3
AUTO ENGLISH (LANGUAGE OPTIONS)
]4
OTHER ----
]3
ENGLISH (LANGUAGE OPTIONS)
Setting ratings (When level 8 is selected)
0 LOCK ALL: To prevent play of discs without ratings
levels.
1 to : To prohabit play of DVD-Video with corresponding
ratings recorded on them.
8 NO LIMIT: To play all discs.
When setting a ratings level, a password screen is shown.
Follow the on-screen instructions.
Do not forget your password.
A message screen will be shown if a DVD-Video
exceeding the ratings level is inserted in the unit. Follow
the on-screen instructions.
1. Select "CHANGE" and press [ENTER].
•
When "PASSWORD" is displayed, set the
password according to "RATINGS" (è above)
2. Enter the current password with the numbered
buttons, then press [ENTER].
3. Enter the new password with the numbered buttons,
then press [ENTER].
If "VERIFY" is displayed, please verify the password
and insert it again.
3
Select
Register
Select the item.
"VIDEO" tab
n
SETTING STATE
TV ASPECT
Choose the setting to
suit your television and
ORIGINAL preference.
]1 ]2
TV TYPE
Select to suit the type of
television.
]1
NTSC DISC OUT
Choose PAL60 or NTSC
OTHER ----
]1 ]3
output when playing
NTSC discs.
STILL MODE
Specify the type of
picture shown when
paused
.
VIDEO OUT-SCART
Choose the video signal
format to be output
from the SCART and
COMPONENT VIDEO
OUT terminals
(è page 5).
VIDEO OUT (I/P)
Select
"PROGRESSIVE"
only if connecting to
a progressive output
compatible television.
4
Select
Register
Make the settings.
Display the current setting of the items below
4:3PAN&SCAN 4:3LETTERBOX 4:3ZOOM
16:9NORMAL 16:9SHRINK 16:9ZOOM
STANDARD CRT LCD PROJECTION PLASMA
NTSC: Output signals from NTSC discs remain as NTSC.
PAL60: NTSC disc can be viewed on PAL television.
: "NTSC" is factory preset.
Asia
AUTO
FIELD: The picture is not blurred, but picture quality is lower.
FRAME: Overall quality is high, but the picture may appear
blurred.
VIDEO/YPbPr
]5
S-VIDEO/YPbPr
RGB/NO OUTPUT
INTERLACE PROGRESSIVE
When you select "PROGRESSIVE", a message screen will
appear.
•
For progressive output, press [e] and then press [ENTER].
•
Press [RETURN] to cancel.
5
Press to exit.