Panasonic DVD-S325 Operating Instructions Manual page 21

Progressive video
•
There is ghosting This problem is caused by the editing method or material
when progressive used on DVD-Video, but should be corrected if you use
output is on. interlace output. Change "VIDEO OUT (I/P)" in "VIDEO" tab
to "INTERLACE". (16)
•
Pictures not in If the unit is connected to the television through VIDEO OUT
progressive output. or S VIDEO OUT
]
Except Continental Europe
Sound incorrect
•
Sound distorted. Set Advanced surround to "OFF". (10)
•
Piercing noise If you have connected a digital amplifier which does not
comes from the
include decoder, be sure to set "DOLBY DIGITAL",
speakers.
"MPEG
Except Asia
"AUDIO" tab. (1)
•
Effects do not work. None of the audio effects work when the unit is outputting
bitstream signals from the COAXIAl terminal. (6)
•
Some audio effects do not work or have less effect with
some discs.
•
No sound
Audio may not be output due to how files were
created. (18)
Unit displays
•
"noPLAy" You inserted a disc the unit cannot play: Insert one it can. (4)
•
You inserted a blank disc.
•
You inserted a disc that has not been finalized. (4)
•
"U11" The disc may be dirty. (22)
•
You haven't inserted the disc correctly: Insert it correctly. (8)
•
"H " Trouble may have occurred. The number following "H"
depends on the status of the unit. Turn the unit off and then
 stands for a
back to ON. Alternatively, turn the unit off, disconnect the
number.
AC mains lead, and then reconnect it.
•
If the service numbers fail to clear, note the service number
and contact a qualified service person.
•
"nodISC" You haven't inserted a disc: Insert one.
•
You haven't inserted the disc correctly: Insert it correctly. (8)
, output will be interlace.
]
" to "PCM" and set "DTS" to "OFF" in
Television displays
•
"ERR H " Trouble may have occurred. The number following "H"
depends on the status of the unit. Turn the unit off and then
 stands for a
back to ON. Alternatively, turn the unit off, disconnect the
number.
AC mains lead, and then reconnect it.
•
If the service numbers fail to clear, note the service number
and contact a qualified service person.
•
"ERR U11" The disc may be dirty. (22)
•
You haven't inserted the disc correctly: Insert it correctly. (8)
•
"NODISC"
You haven't inserted a disc: Insert one.
•
You haven't inserted the disc correctly: Insert it correctly. (8)
•
"X"
The operation is prohibited by the unit or disc.
•
"THIS DISC MAY
You can only play DVD-Video if their region number is the
NOT BE PLAYED IN
same or includes the same region number as the unit or if
YOUR REGION."
the DVD-Video is marked "All". Confirm the region number
for the unit on the rear panel. (Cover)
•
"THIS TYPE OF You inserted a disc that has not been finalized. (4)
•
DISC CANNOT
You inserted a disc the unit cannot play: Insert one it can. (4)
•
BE PLAYED.
You inserted a blank disc.
PLEASE INSERT A
DIFFERENT DISC."
•
"AUTHORIZATION You are trying to play the DivX VOD content that was
ERROR purchased with a different registration code. You cannot
THIS PLAYER IS
play the content on this unit. (13)
NOT AUTHORIZED
TO PLAY THIS
VIDEO."
•
"RENTAL EXPIRED" The DivX VOD content has zero remaining plays. You
cannot play it. (13)
Recording
•
Cannot record to You cannot record MP3.
•
digital recording You cannot record DVDs that have protection preventing
equipment.
digital recording.
•
(Incorrect sound You cannot record DVDs if the recording equipment cannot
recorded.) handle signals with a sampling frequency of 48 kHz.
•
Make the following settings:
– Advanced surround:
– DOWN SAMPLING:
– DOLBY DIGITAL/MPEG
– DTS:
OFF (10)
ON (1)
PCM (1)
:
Except Asia
OFF (1)
21