Changing The Player Settings - Panasonic DVD-S47EE Operating Instructions Manual

Changing the player settings

≥ The settings remain intact even if you switch the unit to standby.
≥ Underlined items are the factory preset.
≥ See page 13 for operation.
∫ "Disc" tab
Audio
Choose the audio language.
Subtitle
Choose the subtitle language.
Menus
Choose the language for disc menus.
Ratings
Set a ratings level to limit DVD-Video play.
≥ Follow the on-screen instructions.
∫ "Video" tab
TV Aspect
Choose the setting to suit your television
and preference.
Progressive Out (Component)
TV Type
Select to suit the type of television.
Time Delay
When connected with an AV amplifier and
Plasma display, adjust if you notice the
audio is out of sync with the video.
Still Mode
Specify the type of picture shown when paused.
Black Level Control
Change the black level of the picture if you
connected a television through the
COMPONENT VIDEO OUT terminals.
∫ "Audio" tab
PCM Digital Output
Check the digital input limitations of the
equipment you connect using COAXIAL or
OPTICAL terminal and select the maximum
sampling frequency of PCM digital output.
Dolby Digital
DTS Digital Surround
Dynamic Range Compression
Audio during Search
∫ "Display" tab
Menu Language
On-Screen Messages
∫ "Others" tab
FL Dimmer
Changes the brightness of the unit's display.
Auto Power Off
HighMAT
QUICK SETUP
Re-initialize Setting
This returns all values in the Setup menus to
the default settings.
§1
The original language designed on the disc is selected.
§2
Input a code number referring to the table on page 13.
§3
If the language selected for "Audio" is not available, subtitle appear in
that language (If available on the disc).
12
≥ ≥ ≥
English French Spanish
≥ ≥ ≥
§3
Automatic English
≥ ≥ ≥
English French Spanish
≥ Changing the menu language from QUICK SETUP also changes this setting.
Setting ratings (When level 8 is selected)
≥ ≥ ≥
8 No Limit 1 to 7 0 Lock All: To prevent play of discs without ratings levels.
Changing ratings (When level 0–7 is selected)
≥ ≥
Unlock Player Change Password
≥
4:3 Pan&Scan: Regular aspect television (4:3)
The sides of the widescreen picture are cut off so it fills the screen (unless
prohibited by the disc).
≥
4:3 Letterbox: Regular aspect television (4:3)
Widescreen picture is shown in the letterbox style.
≥
16:9: Widescreen television (16:9)
≥
Disable: Interlace output
≥
Enable: Progressive output
≥ ≥
Standard(Direct View TV)
≥
Plasma TV
≥ ≥ ≥
0ms 20ms 40ms
≥ ≥
Automatic Field:The picture is not blurred, but picture quality is lower.
≥
Frame: Overall quality is high, but the picture may appear blurred.
Lighter: When connected through VIDEO OUT or S VIDEO OUT.
Darker: When connected through COMPONENT VIDEO OUT.
Off: When not connected digitally
Up to 48 kHz: When connected to equipment compatible with 44.1 or 48 kHz
Up to 96 kHz: When connected to equipment compatible with 88.2 or 96 kHz
Up to 192 kHz: When connected to equipment compatible with 176.4 or 192 kHz
≥Signals that exceed the set maximum frequency and signals from copy-protected discs are converted to 48 or 44.1 kHz.
≥Some equipment cannot handle sampling frequencies of 88.2 kHz, even if they can handle 96 kHz.
Read your equipment's operating instructions for details.
≥ ≥
Select "Bitstream" when the equipment can decode the bitstream (digital
Bitstream PCM
form of multi-channel data). Otherwise, select "PCM".
≥ ≥
PCM Bitstream
≥ If the bitstream is output to the equipment without a decoder, high levels
of noise can be output and may damage your speakers and hearing.
≥
Off
≥
On: Adjusts for clarity even when the volume is low through compressing the range of the lowest sound
level and the highest sound level. Convenient for late night viewing. (Only works with Dolby Digital)
≥ ≥
On Off
≥ ≥ ≥
English Français
≥ ≥
On Off
≥ ≥
Bright Dim
≥
Auto:The display is dimmed during play, but brightens when you perform some operations .
≥
On: The unit switches to standby mode after about 30 minutes in the stop mode, irrespective of the SLEEP setting.
≥
Off
≥ ≥
Enable Disable (Unable to use the HighMAT function.)
≥ ≥
Yes No
≥
Yes: The password screen is shown if "Ratings" (above) are set. Please enter the same password.
After "INIT" on the display disappears, turn the unit off and on again.
≥
No
The QUICK SETUP enables successive settings of the items in the
shaded area.
≥ ≥
§1
Original Other
≥ ≥
French Spanish Other
≥ ¢¢¢¢
§2
Other
≥ ≥
Change Level Temporary Unlock
≥
CRT Projector LCD TV/Projector
≥ ≥
60ms 80ms
Español
¢¢¢¢
§2
¢¢¢¢
§2
≥
Projection TV
≥
100ms