Step 1 Connection To A Television - Panasonic DVD-S325 Operating Instructions Manual

STEP 1 Connection to a television

•
Do not place the unit on amplifiers or equipment that may become hot. The heat can damage the unit.
•
Do not connect through the video cassette recorder. Due to copy guard protection, the picture may not display properly.
•
Turn off all equipment before connection and read the appropriate operating instructions.
•
Connect the terminals of the same colour.
•
Unless otherwise indicated, illustrations are of areas except Continental Europe.
( :There is no S VIDEO OUT terminal on the unit.)
Continental Europe
With VIDEO IN or S VIDEO IN
U A D O I N I I V E D
R L N I
When using this connection, the audio cable
]1
(red and white plugs) should also be connected.
(
]2 Except Continental Europe
You can connect the audio cable to the 2-channel
audio input terminals of an analog amplifier or
system component to enjoy stereo sound.
Television
O S I V E D O
N I
S video cable
]1
Audio/video cable
Audio/video
cable
]2
Back of the unit
To enjoy progressive video
Connect to a progressive output compatible television.
1.
Set "VIDEO OUT-SCART" to "VIDEO/YPbPr" for component terminals
(è page 16, "VIDEO" tab).
included)
2. Set "VIDEO OUT (I/P)" to "PROGRESSIVE", then follow the instructions
on the menu screen (è page 16, "VIDEO" tab).
Continental Europe
Panasonic televisions with 625 (576)/50i · 50p, 525 (480)/60i · 60p input
terminals are progressive compatible.
With COMPONENT VIDEO IN
U A D O I N I
C
R L
Not used
]2
Continental Europe
With SCART (AV) IN
O M P O E N T N
I V E D O N I
Video cable
21-pin SCART
cable
•
Continental Europe
SCART (AV) IN
AV
If the television is compatible
with S-video, set "VIDEO
OUT-SCART" to "S-VIDEO/
YPbPr", or compatible
with RGB, set "VIDEO
OUT-SCART" to "RGB/NO
OUTPUT" (è page 16,
"VIDEO" tab).
5