Changing The Player Settings; System; Language - Panasonic DVD-S700GN-K Operating Instructions Manual

Changing the player settings

Change the unit's settings if necessary. The settings
remain intact even if you switch the unit to standby.
Press SETUP.

Press e r to select the menu, and press q.

Press e r to select the item, and press q to

confi rm your selection.
Press e r to select the settings, and press

OK.
• To return the previous menu, press w.
• To exit, press SETUP.
Operation methods other than the above
procedure may be displayed. In that case, follow
the on-screen instructions.
Depending on the type of media, this unit's
settings may be disabled.

SYSTEM

TV System
This menu contains the options for
selecting the color system that matches the
connected TV.
NTSC
Video signal from PAL disc playback will
be output in NTSC format.
PAL
Video signal from NTSC disc playback will
be output in PAL format.
PAL60
Video signal from NTSC disc playback will
be output in PAL60 format.
Auto
Video output signal will be set
automatically to suit the connected TV.
Screen Saver
This setting enables the Screen Saver
to activate. Screen saver will start
automatically if the media playback is
stopped for about 5 minutes.
SCART RGB (For the model with AV (21 pin))
When connecting this unit with the SCART
terminal, select "On".
Resolution (DVD-S700 only)
Select a video resolution that is compatible
with the TV display capability.
Selecting "Auto" can automatically select
the best resolution.
HDMI CEC (DVD-S700 only)
When connecting this unit with the TV via
the HDMI cable, linked operations with a
connected device is possible.
TV Type
Select picture aspect to suit your
connected TV.
4:3PS/4:3LB
When connected to a 4:3 aspect
television:
Playing 16:9 ratio picture is following
– 4:3PS: the side is cut off
– 4:3LB: with black bands on top and
bottom
16:9/16:9full
When connected to a 16:9 aspect
television:
Playing 4:3 ratio picture is following
– 16:9: displayed in the center of the
screen
– 16:9full: stretched horizontally to fi ll the
TV screen

LANGUAGE

OSD
This switches the language for display
menu.
Audio
This switches the language for output
audio.
Subtitle
This switches the language for subtitle.
Menu
This switches the language for disc menu.
(For the United Kingdom, Ireland, Eastern
Europe and South Africa only)
Xvid Subtitle
You can set the font type that supports the
recorded Xvid subtitle.
Press e r to select "Xvid Subtitle",

then press q.
"Latin 1", "Latin 2", "Cyrillic", "Turkish"
Select the font type for the recorded
title.
Press e r to select a setting, then

press OK to confi rm your selection.
11