Table of Contents
Advertisement
"AUDIO" tab
n
SETTING STATE
Display the current setting of the items below
DOWN SAMPLING
ON: When connected to equipment compatible with 44.1 or 48 kHz
Check the digital
OFF: When connected to equipment compatible with 88.2 or 96 kHz
•
input limitations of the
Signals from copy-protected discs are converted to 48 or
equipment you connect
44.1 kHz.
•
using COAXIAl terminal
Some equipment cannot handle sampling frequencies
and select the maximum
of 88.2 kHz, even if they can handle 96 kHz. Read your
sampling frequency of
equipment's operating instructions for details.
PCM digital output.
DOLBY DIGITAL
BITSTREAM PCM
With COAXIAl
connections (è page 6)
DTS
BITSTREAM OFF
With COAXIAl
connections (è page 6)
MPEG
BITSTREAM PCM
]5]6
With COAXIAl
connections (è page 6)
DYNAMIC RANGE
ON:
Adjusts for clarity even when the volume is low
through compressing the range of the lowest sound
level and the highest sound level. Convenient for late
night viewing. (Only works with Dolby Digital)
OFF
"DISPLAY" tab
n
SETTING STATE
Display the current setting of the items below
LANGUAGE
ENGLISH FRANÇAIS ESPAÑOL DEUTSCH
]5
ITALIANO SVENSKA NEDERLANDS POLSKI
ENGLISH FRANÇAIS ESPAÑOL DEUTSCH
]6
ITALIANO ÐÓÑÑÊÈÉ NEDERLANDS PORTUGUÊS
ENGLISH 繁體中文
]7
"OTHERS" tab
n
SETTING STATE
Display the current setting of the items below
REGISTRATION
You need this registration code to purchase and play DivX
Displays the unit's
Video-on-Demand (VOD) content. (è page 13, About DivX
registration code.
VOD contents)
Select "BITSTREAM" when
the equipment can decode the
bitstream (digital form of multi-
channel data). Otherwise,
select "PCM" or "OFF". (If
the bitstream is output to the
equipment without a decoder,
high levels of noise can be
output and may damage your
speakers and hearing.)
JPEG TIME
To change the slideshow timing
1 SEC to 15 SEC (in 1 unit)
60 SEC to 180 SEC (in 30 unit)
•
"3 SEC" is the factory preset.
FL DIMMER
BRIGHT DIM
AUTO: The display is dimmed, but brightness only when you
Changes the brightness
of the unit's display.
perform some operations.
AUTO POWER OFF
ON:
The unit switches to standby mode after about 30
minutes in the stop mode.
OFF
DEFAULTS
RESET
This returns all values in
The password screen is shown if "RATINGS" (è page 16) is
the Setup menus to the
set. Please enter the same password with the numbered
default settings.
buttons, then press [ENTER], then turn the unit off and on
again.
Language options
]1
Continental Europe
FRENCH, SPANISH, GERMAN, ITALIAN, SWEDISH, DUTCH and POLISH
The Middle East and South Africa
FRENCH, SPANISH, GERMAN, ITALIAN, RUSSIAN, DUTCH and PORTUGUESE
Asia
CHINESE
The original language designed on the disc is selected.
]2
Input a code number referring to the table (è page 19).
]3
If the language selected for "AUDIO" is not available, subtitles appear in that
]4
language (If available on the disc).
]5
Continental Europe
]6
The Middle East and South Africa
]7
Asia
15 SEC to 60 SEC (in 5 unit)
1
Hide quick links:
Advertisement
Table of Contents
