Panasonic Viera TX-P55VT30B Operating Instructions Manual page 43

Menu Item
Picture in Picture
3D Settings
Screen Display
Intelligent Frame
Creation
24p Smooth Film
Clear Cinema
3D Refresh Rate
Resolution
Enhancer
Side Panel
16:9 Overscan
DVI Input Setting
Pixel Orbiter
Scrolling Bar
Reset to Defaults
Adjustments / Configurations (alternatives)
Displays two windows at once (p. 71)
Adjusts and sets to view 3D images (p. 39)
Turns the screen off when you select [Off] [Off] / [On]
•
The sound is active even if the screen turns off.
•
Press any buttons (except Standby) to turn the screen on.
•
This function is effective in reducing power consumption when
listening to the sound without watching the TV screen.
Automatically compensates the picture frame rate and removes
juddering movements to make the images smooth [Off] / [Mid] / [Max]
•
Depending on the contents, images may be noisy. To prevent the
noise, change the setting.
•
This function is not available for selection (default to [Off]) when
[Viewing Mode] is set to [Game] or in the mode of multi window /
network service operations.
Automatically compensates the picture frame rate to make the 24p
source movie images smooth [Off] / [Mid] / [Max]
•
This is available only for 24p signal input and displayed instead of
[Intelligent Frame Creation].
•
This function is not available for selection (default to [Off]) when
[Viewing Mode] is set to [Game] or in the mode of multi window /
network service operations.
Improves vertical resolution for movie images [Off] / [On]
•
This function is available for the interlaced signal (except when
[Viewing Mode] is set to [Game]).
Reduces juddering and flicker noises of the 3D images [Auto] / [100Hz]
•
If the room is lit by fluorescent lights / dimmers (50 Hz) and light
appears to flicker when using the 3D Eyewear, set to [100Hz].
Enhances the picture resolution to make the image sharper
[Off] / [Mid] / [Max]
•
This function is available for SD (Standard definition) signal.
•
As for HD (High definition) signal, this function is available when
aspect mode is set to [16:9] ([16:9 Overscan] is set to [On]) or [Zoom].
•
Not valid on Media Player and network service operations
Increases the brightness of the side panel [Off] / [Low] / [Mid] / [High]
•
The recommended setting is [High] to prevent panel "image retention".
Selects the screen area displaying the image [Off] / [On]
[On] : Enlarges the image to hide the edge of the image.
[Off] : Displays the image in the original size.
•
Set to [On] if noise is generated on the edge of the screen.
•
This function is available when aspect is set to [Auto] (16:9 signal
only) or [16:9].
•
This function can be memorized separately for SD (Standard
definition) and HD (High definition) signals.
•
Not valid on VIERA Connect
Changes the black level in the image for HDMI input mode with DVI
input signal manually [Normal] / [Full]
•
When the DVI input signal from the external equipment, especially
from PC, is displayed, the black level may not be suitable. In this case,
select [Full].
•
The black level for HDMI input signal will be adjusted automatically.
•
For HDMI input mode with DVI input signal only
Selects the mode for wobbling of the image to prevent panel "image
retention" [Auto] / [On]
[Auto] : Automatically works only for the appropriate images and you
rarely recognise the wobbling.
Scrolls the vertical bar to prevent panel "image retention"
•
Press the OK button to start scrolling and press any buttons (except
Standby) to exit this mode.
Press the OK button to reset the present Picture Viewing Mode to the
default settings
43