Panasonic Viera TX-P55VT30B Operating Instructions Manual page 38

Changing 2D - 3D mode
You can easily change the viewing mode between 2D and 3D using the 3D button.
Select the mode
[3D] / [2D] / [2D 3D] :
Displays the appropriate image that you desire without selecting 3D format
•
This mode may not work properly depending on the source image format. In this case, select the
appropriate 3D format manually.
■
To change 3D format manually
When the image is not changed properly using [3D], [2D] or [2D 3D] mode, use this manual setting.
During the above operation
(red)
[Original] : Displays the source image as it is
•
Use to identify the format type of the source image.
"Table of images that can be seen for each [3D Mode Selection (Manual)] and the source
image format" (see below)
[Frame Sequential - 3D] / [Frame Sequential - 2D] / [Side by Side - 3D] / [Side by Side - 2D] /
[Top and Bottom - 3D] / [Top and Bottom - 2D] : Displays the mode you select
•
Not valid on Analogue and AV mode
[2D 3D] : Converts 2D images into 3D
•
For DVB, Analogue, AV, Component, HDMI, Media Player and network service operations
•
On-screen displays are also seen in 3D in this mode.
•
Please note the 3D images appear slightly different from the originals.
•
Using this function for profit-making purposes, or publically showing images converted from 2D to
3D in places such as shops or hotels etc. may infringe on the rights of the copyright holder protected
under copyright law.
Table of images that can be seen for each [3D Mode Selection (Manual)] and the source image
format
If the picture appears to be abnormal, refer to the table below to choose the correct 3D mode.
[3D Mode Selection]
Source
image format
Frame Sequential
Side by Side (Full)
Side by Side
Top and Bottom
Normal format (2D)
∗ 1 : When selecting [Frame Sequential - 2D], [Side by Side - 2D] or [Top and Bottom - 2D], the images
will be displayed without 3D effect.
•
Depending on the player or broadcasts, the image may be different from the above illustrations.
38
3D Mode Selection
2D 3D
3D
2D
Select the mode
3D Mode Selection (Manual)
Original
Frame Sequential - 3D
Frame Sequential - 2D
Side by Side - 3D
Side by Side - 2D
Top and Bottom - 3D
Top and Bottom - 2D
2D
[Original]
select
set
3D
[Frame [Side by
Sequential - 3D] Side - 3D]
Normal 3D ∗
1
Normal 3D ∗
Normal 3D ∗
•
Items of [3D Mode Selection]
vary depending on the condition.
select
set
[Top and
Bottom - 3D]
1
1
Normal 3D ∗
1
Normal 3D
[2D 3D]