Panasonic Viera TX-P55VT30B Operating Instructions Manual page 125

Message
No module inserted
No recording - Already
recording
No recording - Check media
No recording - Playing
No recording - Unknown
reason
No service
No signal
Overcurrent error on USB
device occurred.
Please remove the USB
device, and switch off the
TV by mains power switch.
PIN incorrect!
Please check settings
and connections on HDMI
devices.
Please enter a frequency
between 10700 and 12750
MHz.
Please check settings
and connections on HDMI
devices.
Please wait.
Recording this channel
now
Reset to Factory Shipping
Condition Completed.
Please switch off TV.
Sending Preset Data
Software successfully
updated.
Press EXIT to continue.
Software update failed.
Please try again later.
Press EXIT to continue.
The device is not directly
connected to the TV.
The device may not work
correctly.
This device will be
formatted and all contents
deleted. Are you sure?
This timer will not follow
the TV Guide information.
Press OK to continue,
RETURN to restore original
timer.
Timer already expired !
Timer incorrect !
•
Check the CI module is inserted completely.
•
The equipment may already be recording.
•
The tape or disc may be "write protected", full, missing or damaged.
•
The equipment may be playing the tape or disc.
•
The recording may not be performed. Check the equipment.
•
The broadcaster has stopped the service. Check the channel in the
TV Guide. (p. 23)
•
The TV cannot detect the signal. Check the connection of the RF
cable.
•
The connected USB device might cause overcurrent error. Follow
the on screen instructions.
•
Check if foreign objects are inside the USB port.
•
The PIN number you entered is wrong.
•
Communication error in VIERA Link function (p. 105).
•
The frequency you entered is out of range. Consult the received
satellite broadcasting company. (p. 61)
•
Communication error in VIERA Link function (p. 105).
•
A function is in progress.
•
The recorder is recording the programme from its own tuner. You can
turn the TV off and leave the equipment recording in the normal way.
•
[Auto Setup] will automatically start when Mains power On / Off
switch is next turned On.
•
Q-Link or VIERA Link channel download is in progress.
•
The software updating is finished.
•
Perform [System Update Search Now] in System Update (p. 70).
If this is still unsuccessful, there may not be any new software
available.
•
Please do not connect the device via a USB HUB.
•
Once you format the USB HDD, all the recorded programme will be
erased.
•
If you edit the start time or end time of Guide link programming by
more than 10 minutes, it will no longer be performed as Guide link
programming. The programming will be performed according to the
time setting.
•
The starting time in Timer Programming has already passed. Set
the timer correctly.
•
Set the start and end times in Timer Programming correctly.
Meaning / Action
(p. 13)
(p. 63)
(p. 69)
(p. 63)
125