Panasonic Viera TX-P55VT30B Operating Instructions Manual page 10

TV
1
2
3
4
1 CI slot (p. 69)
2 SD Card slot
3 USB 3 port
4 HDMI1 - 4 terminal
5 Function select
•
[Volume] / [Contrast] / [Brightness] / [Colour] /
[Sharpness] / [Tint] (NTSC signal) / [Bass] ∗ /
[Treble] ∗ / [Balance] / [Auto Setup] (p. 52, 53)
∗ [Music] or [Speech] mode in the Sound Menu
6 Channel Up / Down, Value change (when
using the F button), Switching the TV On
(press either button for about 1 second when
in Standby mode)
7 Changes the input mode
Using the On Screen Displays
Many features available on this TV can be accessed via the On Screen Display menu.
Operation guide
Operation guide will help you to operate
by using the remote control.
Example : [Owner ID]
Owner ID
Please enter new PIN
PIN
0 9
EXIT
Operation guide
Auto power standby function
The TV will automatically go to Standby mode in the following conditions :
• no signal is received and no operation is performed for 30 minutes in Analogue TV mode
• [Off Timer] is active in the Timer Menu (p. 21)
• no operation is performed for the period selected in [Auto Standby] (p. 45)
•
This function does not affect the recording of Timer Programming, Direct TV Recording and One Touch
10
Recording.
12
8 9
(p. 74, 79)
(p. 74, 112)
(p. 112)
- Operation guide
* * * *
PIN entry
8 Mains power On / Off switch
•
Use to switch the mains power.
5
If you turned the TV Off during Standby
mode by the remote control last time, the
6
TV will be in Standby mode when you
turn the TV On with Mains power On / Off
7
switch.
9 Remote control signal receiver
•
Do not place any objects between the TV
remote control signal receiver and remote
control.
10 C.A.T.S. (Contrast Automatic Tracking
10 11
System) sensor
•
Senses brightness to adjust picture quality
when [C.A.T.S.] in the Picture Menu is set to
[On]
11 Power and Timer LED
•
Red : Standby
Green : On
Orange : Timer Programming On
Orange (flash) :
Recording of Timer Programming, Direct
TV Recording or One Touch Recording in
progress
Red with orange flash :
Standby with Timer Programming On, Direct
TV Recording or One Touch Recording
•
The LED blinks when the TV receives a
command from the remote control.
12 Infrared transmitter for 3D Eyewear
•
Do not place any objects between the
transmitter and 3D Eyewear.
How to use remote control
Open the main menu
Move the cursor / select the menu item /
select from a range of options
Move the cursor / adjust levels /
select from a range of options
Access the menu / store settings after adjustments
have been made or options have been set
Return to the
previous menu
(p. 42)
Exit the menu system
and return to the
normal viewing screen