Cordless Handset - Panasonic KX-FC258FX Operating Instructions Manual

Feature
Setting recall/flash time
(for the base unit and

cordless handset)

Changing the receiving
mode in the manual
answer setting
Setting the connecting
tone
Changing the receiving
mode in the AUTO
ANSWER setting
Changing the TEL/FAX
delayed ring count
Feature code Selection
The recall/flash time depends on your telephone exchange or
{#}{7}{2}
host PBX.
{1} "900msec."
{2} "700msec."
{3} "600msec." (default)
{4} "400msec."
{5} "300msec."
{6} "250msec."
{7} "200msec."
{8} "160msec."
{9} "110msec."
{*} "100msec."
{0} "90msec."
{#} "80msec."
Note:
L If the unit is connected via a PBX, this setting may need to be
changed in order for PBX functions (transferring a call, etc.) to
work correctly. Consult your PBX supplier for the correct
setting.
{1} "TEL" (default): Telephone mode (page 35)
{#}{7}{3}
{2} "TEL/FAX": Telephone/Fax mode (page 36)
If you often have trouble when sending faxes, this feature allows
{#}{7}{6}
you to hear connecting tones: fax tone, ring back tone and busy
tone. You can use those tones to confirm the status of the other
party's machine.
{0} "OFF": Deactivates this feature.
{1} "ON" (default): You will hear connecting tones.
Note:
L If the ring back tone continues, the other party's machine may
not be a fax machine or may have run out of paper. Check with
the other party.
L The connecting tone volume cannot be adjusted.
{1} "TAM/FAX" (default): Telephone Answering Machine/Fax
{#}{7}{7}
mode (page 37)
{2} "FAX ONLY": Fax only mode (page 37)
If you use an extension telephone when this unit is in TEL/FAX
{#}{7}{8}
mode, select the desired number of times the extension
telephone rings before the unit answers the call.
{1} "1"
{2} "2" (default)
{3} "3"
{4} "4"
{5} "5"
{6} "6"
{7} "7"
{8} "8"
{9} "9"
See page 36 for details.
7. Programmable Features
51