Table of Contents
Advertisement
3. Telephone
Set the date and time beforehand (page 18).
Important:
L We recommend you to use this feature in TEL
mode. Using this feature in other modes
(TAM/FAX, FAX ONLY or TEL/FAX mode), the ring
delay setting may not function properly.
Note:
L Night mode can be set for the base unit and the
cordless handset separately.
3.4.1 Cordless handset
To set the start and end time for night mode
1. " i N i #
2. "Ringer Setup" i #
3. "Night Mode" i #
4. "Start/End" i #
5. Enter the desired hour and minute you wish to start
this feature.
L If you use 12-hour time entry, select "AM" or "PM"
by pressing {*} repeatedly before entering the
time.
6. Enter the desired hour and minute you wish to end
this feature.
L If you use 12-hour time entry, select "AM" or "PM"
by pressing {*} repeatedly before entering the
time.
7. # i {ih}
To turn night mode ON/OFF
1. " i N i #
2. "Ringer Setup" i #
3. "Night Mode" i #
4. "On/Off" i #
5. "On" or "Off" (default) i # i {ih}
L When the night mode is set, f is displayed.
To set the ring delay for night mode
This setting allows the cordless handset to ring during
night mode if the caller waits long enough. After the
selected amount of time passes, the cordless handset
will ring. If you select "No Ringing", the cordless
handset will not ring during night mode.
1. " i N i #
2. "Ringer Setup" i #
3. "Night Mode" i #
4. "Ring Delay" i #
5. Select the desired setting. i # i {ih}
To select categories to bypass night mode
1. " i N i #
2. "Ringer Setup" i #
22
3. "Night Mode" i #
4. "Select Category" i #
5. Press the desired category numbers. i #
L The selected category number will flash.
L To cancel a selected category number, press the
number again. The number will stop flashing.
6. {ih}
3.4.2 Base unit
To set the start and end time for night mode
1. {MENU} i {#}{3}{5} i {SET} i {1} i
{SET}
2. Enter the desired hour and minute you wish to start
this feature.
L If you use 12-hour time entry, select "AM" or "PM"
by pressing {*} repeatedly before entering the
time.
3. Enter the desired hour and minute you wish to end
this feature.
L If you use 12-hour time entry, select "AM" or "PM"
by pressing {*} repeatedly before entering the
time.
4. {SET} i {MENU}
To set night mode ON/OFF
1. {MENU} i {#}{3}{5} i {SET} i {2} i
{SET}
2. Press {0} or {1} to select the desired setting.
{0} "OFF" (default)
{1} "ON"
3. {SET} i {MENU}.
Note:
L When the night mode is set, "[N]" is displayed.
To set the ring delay for night mode
This setting allows the base unit to ring during night
mode if the caller waits long enough. After the selected
delay time has passed, the base unit will ring. If you
select "NO RINGING", the base unit will not ring during
night mode.
1. {MENU} i {#}{3}{5} i {SET} i {3} i
{SET}
2. Press {0} to {4} to select the desired setting.
{0} "NO RINGING": the base unit will not ring.
{1} "30sec.": 30 seconds
{2} "60sec." (default): 60 seconds
{3} "90sec.": 90 seconds
{4} "120sec.": 120 seconds
3. {SET} i {MENU}
Advertisement
Table of Contents
