Advertisement
All electrical work should be carried out
by a suitably qualified and competent
person in strict accordance with na-
tional and local safety regulations.
The voltage and rated load are given
on the data plate located underneath
the vacuum cleaner. Please ensure that
these match the household mains sup-
ply.
The appliance must be connected to a
230-240 V/50 Hz a.c. single phase sup-
ply via a 10 A plug.
The wires in the mains lead of this ap-
pliance are coloured in accordance
with the following code:
As the colours of the wires may not cor-
respond with the markings identifying
the terminals in your plug, proceed as
follows: The wire coloured blue must be
connected to the terminal marked with
the letter "N" or coloured black. The
wire coloured brown must be con-
nected to the terminal marked with the
letter "A" or coloured red. Neither core
is to be connected to the earth terminal
of a three-pin plug.
Test marks.....................Electrical safety
............................................C-Tick Mark
Electrically suppressed
according to.....................AS/NZS 1044
30
Advertisement
