Miele S 2111 Operation Instructions Manual

Miele S 2111 Operation Instructions Manual

S 2000 series
Hide thumbs Also See for S 2111:

Advertisement

Operating instructions

Vacuum cleaners
S 2111 / S 2121 / S 2131
To avoid the risk of accidents or damage
to the appliance, it is essential to read these
instructions before using it for the first time.
en - AU, NZ
These operating instructions apply to
standard models S 2111 / S 2121 / S 2131
as well as to other S 2000 series vacuum cleaners
which are distinguished by names rather than numbers.
M.-Nr. 09 196 700

Advertisement

Table of Contents
loading

Summary of Contents for Miele S 2111

  • Page 1: Operating Instructions

    - AU, NZ These operating instructions apply to standard models S 2111 / S 2121 / S 2131 as well as to other S 2000 series vacuum cleaners which are distinguished by names rather than numbers.
  • Page 2: Table Of Contents

    Contents Caring for the environment ......... . 3 Description of the vacuum cleaner .
  • Page 3: Caring For The Environment

    Please dispose of it at your local community waste collection/recycling centre, or contact your Miele Vacuum Cleaner Specialist for advice. Ensure that your old appliance presents no danger to children while being...
  • Page 4: Description Of The Vacuum Cleaner

    Description of the vacuum cleaner...
  • Page 5 Those features marked * depend on the model, and may vary or not be available on your model. Optional accessories Miele accessories including floorheads, filters and dustbags are available to order from your Miele Vacuum Cleaner Specialist, Miele or via the internet at www.miele-shop.com.
  • Page 6: Warning And Safety Instructions

    Do Repairs should only be carried out not use on people or animals. Any other by a Miele authorised service usage, modification or alteration is at technician. Repairs and other work by the owner's risk and could be unqualified persons could be dangerous.
  • Page 7 Miele Service Department or by exhaust filter in place. a Miele authorised service technician. If a dustbag is not inserted, the dust There is a metal inlay underneath compartment cover cannot be closed.
  • Page 8 Warning and Safety instructions Accessories To avoid the risk of injury when vacuuming with a Miele TurboBrush, do not touch the rotating roller brush. It is not advisable to vacuum directly with the handle, i.e. without an accessory attached as the rim could get damaged and you could hurt yourself on sharp edges.
  • Page 9: Preparing For Use

    Preparing for use Attaching the suction hose a ^ Insert the hose connector into the suction socket until it clicks into position. To remove the suction hose b ^ Press the release buttons at the side of the hose connector, and lift the hose from the socket.
  • Page 10 Preparing for use Connecting the handle to the suction tube a ^ Insert the handle into the suction tube until it clicks into position. To do this, line up the guides on the two pieces. To remove the handle b ^ Press the release button (arrow) if you want to separate the parts and pull the handle out of the suction tube...
  • Page 11 Preparing for use Fitting the standard floorhead a ^ Push the suction tube into the floorhead and turn it clockwise or anti-clockwise until it clicks into position. To remove the standard floorhead b ^ Press the release button (arrow) if you want to separate the parts and pull the handle out of the suction tube with a slight twist.
  • Page 12: Using The Accessories Supplied

    Using the accessories supplied The following accessories are supplied: a Dusting brush b Upholstery nozzle c Crevice nozzle d VarioClip for the above accessories Symbols on the VarioClip show where to attach the different accessories. e Depending on the model, your vacuum cleaner might be supplied with an additional exhaust Active Air Clean or Active HEPA filter.
  • Page 13: Use

    Pull out the mains connection cable a ^ Pull out the connection cable to the required length (max. cable length approx. 5.5 m). If vacuuming for longer than 30 minutes, the connection cable must be pulled out to its fullest extent.
  • Page 14: Selecting The Suction Power

    Selecting the suction power The suction power can be regulated to suit the type of flooring. Reducing the suction power reduces the amount of effort required to manoeuvre the floorhead. Some models also have symbols on the controls. The symbols indicate the type of use the settings are suitable for.
  • Page 15: Parking And Storing

    Parking and storing ParkSystem A parking system has been designed for conveniently parking the vacuum cleaner during pauses. ^ Slot the floorhead into the parking attachment at the back of the vacuum cleaner. If the vacuum cleaner is parked on a sloped surface, e.g.
  • Page 16: Maintenance And Care

    These will need to be replaced from dustbags type G/N and genuine Miele time to time to ensure that your vacuum filters by the "Original Miele" logo on the cleaner performs efficiently. packaging or on the dustbags. Only use genuine Miele approved dustbags and filters which display the Original Miele logo.
  • Page 17: When To Change The Dustbag

    Miele vacuum cleaner bags are disposable and intended to be used only once. Dispose of full dustbags. Do not attempt to re-use. Blocked pores reduce the efficiency of the vacuum cleaner.
  • Page 18: Replacing The Dustbag

    Maintenance and care Replacing the dustbag ^ Press the release button for the dust compartment lid and raise the lid as far as it will go. The dustbag has a closing flap which closes automatically when the dust compartment lid is raised to prevent any dust escaping.
  • Page 19: When To Change The Dust Compartment Filter (For Motor Protection)

    ^ Close the dust compartment lid. Replacing the Air Clean filter Replace this filter every time you start a new packet of Miele dustbags. An Air Clean exhaust filter comes with every packet of Miele dustbags. Correctly replacing the Air...
  • Page 20: Replacing One Type Of Exhaust Filter With Another

    Maintenance and care Replacing one type of exhaust filter with another Depending on the model, your vacuum cleaner might be supplied with an additional exhaust Active Air Clean or Active HEPA filter. This filter can be used instead of the Air Clean filter, which is supplied as standard.
  • Page 21: When To Change The Thread Lifters

    ^ Use a suitable tool to remove them from the slots, starting at the sides. ^ Fit new thread lifters. Spare parts are available from your Miele Vacuum Cleaner Specialist, from Miele (see back cover for contact details) or via the internet at www.miele-shop.com.
  • Page 22: Problem Solving Guide / After Sales Service / Warranty

    Specialist This can occur if, for instance, large articles block the suction tube or when – Miele (see back cover for address the filter bag is full or contains particles of fine dust. A heavily soiled exhaust or and telephone number).
  • Page 23: Electrical Connection

    Electrical connection All work should be carried out by a suitably qualified and competent person in strict accordance with national and local safety regulations. The voltage and rated load are given on the data plate located underneath the vacuum cleaner. Please ensure that these match the household mains supply.
  • Page 24 Alteration rights reserved (S 2111 - S 2131) - 2911 M.-Nr. 09 196 700 / 00...

Table of Contents