Miele S 240 series Operating Instructions Manual page 22

The thread lifters on the suction inlet to
the floorhead and upholstery nozzle
can be replaced. Check them from time
to time and replace them if the pile has
worn down.
^ Use a knife or similar object to re-
move them from the slots.
^ Fit the new thread lifters.
1. Release the lever from the bearing
2. Take the bearing out of the roller.
3. Take out the roller.
Remove all threads and hair etc, then
replace the individual parts in the cor-
rect order.
Spare parts are available from your
Miele dealer or from the Miele Spare
Parts Department.
22