Fitting The Lens Cap; The Grip Belt - Panasonic NV-GS60EP Operating Instructions Manual

LSQT1171ENG.book 7 ページ ２００７年１月１０日 水曜日 午後１時７分

Fitting the lens cap

Fit the lens cap to protect the surface of the lens.
1
The lens cap and lens cap cord comes
preattached to the grip belt.
Pass the end of the lens cap cord through
the attached eye on the lens cap. Then pass
the lens cap through the loop made by itself
and pull tight.
≥When not using the lens cap, pull the lens cap
cord in the direction of the arrow. 1
≥When you are not recording, be sure to cover
the lens with the lens cap for protection. 2
1
≥When you remove the lens cap, press the knobs
firmly.
Before using

The grip belt

Adjust the belt length so it fits your hand.
1
Adjust the belt length.
1 Flip the belt.
2 Adjust the length.
3 Fix the belt.
2
3
2
1
LSQT1171
7