Panasonic NV-GS60EP Operating Instructions Manual page 42

LSQT1171ENG.book 42 ページ ２００７年１月１０日 水曜日 午後１時７分
Playback (Sound)
1: Sound is not played back from the built-in
speaker of the movie camera.
0 Is the volume too low? During playback, push
the [sVOLUMEr] lever to display the volume
indication and adjust it. (
2: Different sounds are reproduced at the
same time.
• Have you set [SETUP] >> [AUDIO OUT] >>
[STEREO] and reproduced a picture containing
the main sound and sub sound? Set to [L] to
hear main sound, and set to [R] to hear the sub
sound. ( )
-37-
3: Sounds cannot be played back.
• Have you set [SETUP] >> [12bit AUDIO] >>
[ST2]? Set [12bit AUDIO] >> [ST1]. (
Playback (Pictures)
1: Mosaic-pattern noise appears on images
during cue or review playback.
• This phenomenon is characteristic of digital
video systems. It is not a malfunction.
2: Horizontal stripes appear on images during
cue and review playback.
• Horizontal stripes may appear depending on
the scene, but this is not a malfunction.
3: Although the movie camera is correctly
connected to a TV, playback images cannot
be seen.
• Have you selected video input on the TV?
Please read the operating instructions of your
TV and select the channel that matches the
input terminals used for the connection.
4: Playback picture is not clear.
• Are the heads of the movie camera dirty? If the
heads are dirty, playback image cannot be
clear. Clean the heads by using the head
cleaner for digital video (optional). (
• If the terminal for the AV cable is soiled, noises
may appear on the screen. Wipe the soil off the
terminal with a soft cloth, and then connect the
cable to the AV terminal.
• Is a picture containing a copyright protection
signal (copy guard) being recorded? When a
protected picture is played back by the movie
camera, mosaic-like patterns appear on the
picture.
42
LSQT1171
Others
Others
1: The indication disappears, the screen is
• Turn off the power to the movie camera. If the
)
-30-
2: "PUSH THE RESET SWITCH" is displayed.
• An irregularity in the movie camera has been
)
-37-
• If you do not press the [RESET] button, the
• Even after you press the [RESET] button, the
3: The warning/alarm indication [°] appears
• Did you press the menu button or the recording
• Did you attempt to play a tape without inserting
• Did you attempt to play a tape with copyright
)
-43-
frozen, or no operation can be performed.
power cannot be turned off, press the [RESET]
button, or detach the battery or the AC adaptor
and then reattach it. After that, turn on the
power again. If normal operation is still not
restored, detach the power connected, and
consult the dealer who you purchased the
movie camera from.
automatically detected. Remove the cassette
for data protection and then press the [RESET]
button. The movie camera will be activated.
power to the movie camera is turned off
automatically about 1 minute later.
indication may still appear repeatedly. If so, the
movie camera needs repair. Detach the power
connected, and consult the dealer who you
purchased the movie camera from. Do not
attempt to repair the appliance by yourself.
when the camera is operated in the WEB
camera mode.
start/stop button? You cannot use the menu or
record onto the tape in the WEB camera mode.
it? Insert a tape.
protection (copy guard)? Pictures of the tape
with copyright protection (copy guard) cannot
be displayed on the PC. (The audio of the tape
can be played.)