Shipping Condition - Panasonic TH-37PE30 Operating Instructions Manual

Shipping condition

Shipping condition allows you to reset the TV to its original condition, i.e. no channels tuned in.
This is useful, for example, if you move to a different area when you will probably want the TV to tune itself to your new
local stations.
This can be done either through the Shipping condition menu or through the Auto setup menu.
The Shipping condition menu will reset all data, clearing all analogue and DVB tuning information and resetting all
control levels back to factory settings.
You may need to adjust your VCR or programme position '0' VCR after operating the Shipping condition menu.
During Analogue or DVB mode
Press the MENU button.
Move to choose Setup menu.
Access Setup menu.
Move to choose Analogue Tuning Menu.
(In DVB mode, choose Shipping condition, then press OK.)
Access Analogue Tuning Menu.
Move to choose Shipping condition.
Access Shipping condition.
Press OK to start.
Press again, to confirm, each time that you are asked, "Are you sure?".
Switch the TV off at the mains power switch.
The next time you switch the TV on, Auto setup will begin. Analogue
and DVB stations will be located, sorted and stored ready for use.
See page 19.
MENU
MODE
OK
N
1 2 3
4 5 6
7 8 9
0
C
IDTV
OK
Analogue Tuning Menu
Programme edit
Auto setup
Manual tuning
Shipping condition Access
Owner ID
Shipping condition
All tuning data will be erased
Are you sure ?
Are you sure ?
Start
Return Exit
21