Advertisement
5
4. Select [Yes]
Access Point Settings
Encryption key is set to:-
XXXXXXXX
Select 'Yes' to confirm.
Select 'No' to change.
Yes
5. After the access point setting is finished, perform the connection test
6. Go to the next step
(Press twice)
Select [Home]
6
Select [Home] viewing environment to use in your home environment.
Please select your viewing environment.
Home
■
[Shop] viewing environment (for shop display only)
[Shop] viewing environment is the demonstration mode to explain main features of this TV.
Select [Home] viewing environment to use in your home environment.
●
You can return to viewing environment selection screen at the stage of Shop confirmation screen and
Automatic Demo Off / On selection screen.
1
Return to viewing environment
selection screen
Shop
You have selected shop mode
Automatic Demo
Off
To change viewing environment later on, you will need to initialise all settings by accessing Shipping
Condition.
Auto Tuning is now complete and your TV is ready for viewing.
If tuning has failed, check the connection of the RF cable, and then, follow the on-screen instructions.
Note
●
To check the channel list
●
To edit or hide (skip) channels
●
To retune all channels
●
To add the available TV mode later
●
To initialise all settings
If you connect the Wireless LAN Adaptor later on, the confirmation screen
will be displayed for the setup.
●
To setup the wireless connection
16
No
Connection Test
Check access point connection.
Check acquired IP address.
Check for devices using same IP address.
Check gateway connection.
Shop
On
[Shipping Condition] (p. 38)
"Using the Freeview Guide (Digital TV)" (p. 21)
"Tuning and Editing Channels" (p. 33 - 36)
[Auto Tuning] in "Tuning and Editing Channels" (p. 35, 36)
[Add TV Signal] (p. 31)
[Shipping Condition] (p. 38)
(p. 51)
select
set
●
To re-enter the encryption key, select [No].
: succeeded
The test is successful and the TV is connected to
the network.
: failed
Check the settings and connections.
●
To set manually, select [Manual] and set each
item.
For details
select
set
2
Select [Home]
Please select your viewing environment.
RETURN
Home
(p. 52)
Shop
Wireless LAN adaptor connection
Wireless LAN adaptor connected, do you want to
set it up?
No - Exit
Current network type : Wireless
Yes
select
set
No
Advertisement
