Picture And Text; Still - Panasonic TH-37PE30 Operating Instructions Manual

Teletext operation
DVB teletext services (Digital text)
DVB teletext services differ greatly from analogue teletext. When you switch to a DVB teletext
OK
service, the images you see can contain graphics and text, laid out and controlled in a manner
decided by the broadcaster. In all cases, it is possible to navigate the pages using buttons on the
remote control, but because the commands available must apply to all manufacturers of DVB
equipment, some on screen commands may not correspond exactly to the remote control buttons.
For example:
• For the on screen command 'select' or 'go', use the OK button.
• If you see the
1 2 3
• If you see a line of key words displayed in red, green, yellow and blue, use the coloured
4 5 6
multifunction buttons to operate the functions.
7 8 9
VCR • For numbered options, use the numeric keypad.
0
• The TV/TEXT button should allow you to exit the teletext system. Alternatively, press the Channel
up / down buttons to select another channel.
TV/TEXT
As soon as you switch to a DVB channel with links to a teletext service, software is downloaded in
the background to enable the teletext function. This means that when switching to a DVB channel,
you should wait for approximately 5 seconds before pressing the TV/TEXT button – this will allow
the software to download. If you press the TV/TEXT button before download is complete, there
will be a short delay before the text screen is displayed.
While navigating DVB teletext, you will find there is a short delay when moving between pages
while the page downloads.
There is often a prompt shown somewhere on the page (for example "Loading") to let you know
what is happening.

Picture and text

Press the TV/TEXT button, followed by the MULTI WINDOW
button to move between viewing teletext and the picture and text
feature. Picture and text lets you see the current programme and
a page of teletext side by side.
Whilst using this feature, the remote control affects the teletext
page; if you wish to make changes to the programme viewed
press the TV/TEXT button to return to watching the programme
on its own then make the desired changes.

Still

Press the HOLD button to freeze the picture.
Press again to return to watching the current programme.
44
(DVB mode only)
symbols, use the appropriate CURSOR keys.
(Analogue mode only)
Teletext mode
Teletext
TV/TEXT
MULTI WINDOW
Picture and text mode
Teletext
TV
HOLD
MODE
OK
N
1 2 3
4 5 6
7 8 9
0
C
IDTV
MODE
OK
N
1 2 3
4 5 6
7 8 9
0
C