Table of Contents
Advertisement
Powering the Camera
Charging the Battery
Use the supplied battery charger (D-BC92) to charge the supplied rechargeable
lithium-ion battery (D-LI92) before using it in the camera for the first time or after
a long period of non-use, or when the [Battery depleted] message appears.
Note: AC plug cord "Listed, Type SPT-2 or NISPT-2, 18/2 flexible cord, rated 125
V, 7A, minimum 6 ft (1.8 m)"
Battery
Battery charger
1
Connect the AC plug cord to the battery charger.
2
Plug the AC plug cord into the power outlet.
3
Place the battery in the battery charger so that the PENTAX
logo is facing up.
The charging indicator turns on while charging.
When charging is finished, the charging indicator turns off.
4
Remove the battery from the battery charger when charging is finished.
• Do not charge batteries other than the rechargeable lithium ion D-LI92
battery using the supplied D-BC92 battery charger. Doing otherwise may
cause damage or overheating.
• The battery has reached the end of its service life when it starts to run down
soon after being charged. Replace it with a new battery.
• If the battery is inserted correctly but the charging indicator fails to light, the
battery may be faulty. Replace it with a new battery.
Charging indicator
While charging: Lights
Charging finished: Turns off
3
1
2
To power outlet
AC plug cord
1
33
Advertisement
Table of Contents
