Copying Images And Sound Files - Pentax Optio WG-2GPS Operating Manual

• When a title picture is added to the beginning of a movie: When the movie
is played back, the still picture is played back for three seconds, and then
the movie is played back. The still picture registered as title picture is used
as the thumbnail of the movie.
When a title picture is added to the end of a movie: When the movie is
played back, the movie is played back, and then the still picture is played
back for three seconds. The thumbnail of the movie is not changed by
adding a title picture to the end of the movie.
• Only a still picture with the same aspect ratio as the movie can be set as a
title picture.

Copying Images and Sound Files

You can copy images and sound files from the built-in memory to the SD Memory
Card and vice versa. This function can only be selected when an SD Memory
Card has been inserted in the camera.
Make sure that the camera is turned off before inserting or removing the SD
Memory Card.
1
Use the four-way controller (2345) to select p (Image/
Sound Copy) from the Playback Mode Palette.
2
Press the 4 button.
The copying method selection screen appears.
To Copy Files from the Built-in Memory to the SD Memory Card
All the images and sound files in the built-in memory are copied to the SD Memory
Card at once. Before copying the images, make sure that there is enough space
on the SD Memory Card.
3
Use the four-way controller (2) to
select [2}{].
4
Press the 4 button.
All the images and sound files are copied to the SD Memory Card.
SD
SD SD SD
Cancel Cancel Cancel
OK OK OK OK OK OK
5
163