Copying Images And Sound Files - Pentax WG-10 Operating Manual

• When a title picture is added to the beginning of a movie: When the
movie is played back, the still picture is played back for three seconds,
and then the movie is played back. The still picture registered as title
picture is used as the thumbnail of the movie.
When a title picture is added to the end of a movie: When the movie is
played back, the movie is played back, and then the still picture is
played back for three seconds. The thumbnail of the movie is not
changed by adding a title picture to the end of the movie.
• Only a still image with the same aspect ratio as the movie can be set
as the title picture.

Copying Images and Sound Files

You can copy images and sound files from the built-in memory to the SD
Memory Card and vice versa. This function can only be selected when
an SD Memory Card has been inserted in the camera.
Make sure that the camera is turned off before inserting or removing the
SD Memory Card.
1
In Q mode, press the four-way controller (3).
The Playback Mode Palette appears.
2
Use the four-way controller
(2345) to select p (Image/
Sound Copy).
3
Press the 4 button.
The copying method selection screen appears.
Image/Sound Copy
For copying images and
sounds between the builtin
memory and SD memory card
Cancel
MENU
5
2 / 2
OK
OK
203