Miele CVA 610 Operating Instructions Manual page 21

When the feature "Programmed hot water" is turned
on, the machine will dispense a precise, pre-pro-
grammed quantity of hot water when the hot water
button d is pressed. (See section below on pro-
gramming in the quantity of hot water.) When the fea-
ture is turned off, the machine will dispense hot water
freely if the hot water button d is pressed, and con-
tinue to do so until the button d is pressed again.
Turn the program selector counterclockwise to
"Program mode".
The appliance can now be programmed and will
respond according to the symbols shown under
the buttons.
The following will appear in the display window:
Press the button to highlight programming op-
e
tion "Prog. hot water" with an asterisk.
Press ENTER to confirm this programming option.
The sub-menu is shown in the display window as
follows:
Press the button to turn the feature On or Off.
e
Press ENTER to
turn the program selector to "0ff" to
mistake has been made.
This will bring you out of the sub-menu.
this setting, or
if a
21