Panasonic KX-TCD150F Operating Instructions Manual page 13

TCD150FX(e-e).book Page 13 Thursday, June 9, 2005 6:59 PM
Code No. Feature (Default setting)
Call restriction
{6}
Setting call restriction
− Enter base unit PIN (default: "0000"). i {1} i {>}
− Enter the phone number to be restricted (8 digits max.).
− {>}
Turning on/off call restriction
− Enter base unit PIN (default: "0000").
− Press {1} to turn on/off. i {>}
Emergency number
− Enter base unit PIN (default: "0000"). i {*}
Time and date: page 7
{*}
*1 Only the emergency number setting will not be reset.
*2 Change the flash time if necessary to suit your PBX or service provider. For further
information, consult your nearest Panasonic service centre.
*3 If you change the PIN, please write down your new PIN as the unit will not reveal the PIN
to you. If you forget your PIN, consult your nearest Panasonic service centre.
*4 Call restriction feature restricts the handset from dialling certain phone numbers. You can
assign up to 10 phone numbers (memory locations 0–9) to be restricted.
*5 Emergency number feature determines which phone numbers may be dialled while the
call bar feature is turned on. A total of 4 emergency numbers (memory locations 1–4) can
be stored.
*4
L To select a different memory location, press {>} repeatedly and
enter a number.
L Handset number will be displayed. Flashing number indicates
call restriction is on; non-flashing number indicates call restriction
is off.
*5
Storing:
− Enter the emergency number (8 digits max.).
L To select a different memory location, press {>} and enter a
number.
− {>}
Editing:
Display the desired number ({>}). i {C} i Enter the new
emergency number. i {>}
Useful Telephone Settings
13