Sending Documents Created On The Pc - Panasonic KX-FLM600E Operating Instructions Manual

PC Fax
Sending documents created on the
Sending a document created by an application as a fax
message
You can access the fax function from a Windows application by using the Print command in the File menu.
Select PANA LINK FAX as the active printer.
For example, to send a document created from Microsoft Word, proceed as follows.
1 Open the document you want to send.
2 Select Print from the File menu.
≥The Print dialogue box will appear.
Select PANA LINK FAX as the active printer.
3
Click [OK] in the Print dialogue box.
4
≥If the PANA LINK application has not started
yet, it will start now, and one item will be
added to it as the transmission document.
Note:
≥If the line is busy or there is no answer, the PANA LINK Fax will automatically redial the number up to 5 times
(This can be changed to up to 14 times.). To see fax auto redial information, open the Setup dialog box by
pressing [Setup] in the main panel and click the transmission tab.
≥To cancel transmission after dialling, click [STOP] in the main panel or press (STOP) on the fax machine.
≥When you click [START] to send the selected file, any document set on the fax machine will also be sent at
the same time.
84
PC!
5 Enter the fax number to which you want to
send the document.
≥To enter the telephone number, you can use
the keypad, one-touch dialling or the address
book.
Keypad
Address book
Click [START] in the main panel.
6
≥The document will be sent.
One-touch
dialling