Table of Contents
Advertisement
Quick Start
Installation!
Before installation
Remove the shipping tape.
Toner cartridge
1
(p. 20–22)
A.
Pull the top cover handle
forward and open the top
cover.
B.
Remove the protection cap
attached to the cartridge.
Protection
cap
A.
≥Do not touch the roller.
C.
Rock the cartridge from side
to side several times
carefully.
D.
Install the cartridge,
holding the two
tabs.
6
6
(p. 20)
Shipping tape
Shipping
tape
Tabs
Roller
Top cover
handle
Drum unit
2
A.
Remove the protection cap
and protection sheet attached
to the drum unit.
≥Do not touch or scratch the
green drum surface.
A.
≥Do not expose the drum unit to
light for more than 5 minutes.
Tabs
Protection
cap
B.
Install the drum unit on the
toner cartridge, holding the
two tabs.
C.
Close the top cover.
Top cover
(p. 20–22)
Green drum
surface
Protection
sheet
Advertisement
Table of Contents
