Table of Contents
Advertisement
8. Programmable Features
Feature/Code
Receiving other size
documents
{#}{4}{3}{2}
Changing the fax
activation code
{#}{4}{3}{4}
Setting the auto
disconnection
{#}{4}{3}{5}
Changing the silent fax
recognition ring setting
{#}{4}{3}{6}
58
Selection
To receive a fax document that is longer than your recording paper.
{0} "OFF": The unit will print the original size.
{1} "ON" (default): The unit will fit received documents onto your
recording paper.
If you wish to use an extension telephone to receive faxes, activate this
feature and program the activation code.
Important:
L The fax activation code must be different from the code that
you programmed on the answering machine.
{0} "OFF"
{1} "ON" (default)
1. Press {MENU}.
2. Press {#}, then {4}{3}{4}.
3. Press {1} to select "ON".
4. Press {SET}.
5. Enter your code from 2 to 4 digits, using 0–9, {*} and {#}.
L The default code is ";#9".
L Do not enter "0000".
6. Press {SET}.
7. Press {MENU}.
To answer a call with an extension telephone in TEL/FAX mode (page
36), activate this feature and program the code.
{0} "OFF"
{1} "ON" (default)
1. Press {MENU}.
2. Press {#}, then {4}{3}{5}.
3. Press {1} to select "ON".
4. Press {SET}.
5. Enter your code from 2 to 4 digits, using 0–9 and {*}.
L The default code is ";0".
6. Press {SET}.
7. Press {MENU}.
To change the number of times the unit rings while in TEL/FAX mode.
{3} "3" (default)
{4} "4"
{5} "5"
{6} "6"
{7} "7"
{8} "8"
{9} "9"
Note:
L See page 36 for details.
Advertisement
Table of Contents
