Table of Contents
Advertisement
For details about the [Print] dialogue
box, click [?], then click the desired item.
Note:
L For Microsoft PowerPoint
[Color] or remove the check next to
[Grayscale] in the print dialogue so that
coloured text will be printed in greyscale.
3
Select [Panasonic KX-FLM653FX] as the
active printer.
L If you have changed the name of the fax
machine when installing, select that
name from the list.
L To change the printer settings, proceed
as follows.
For Windows 98/Windows Me:
Click [Properties], then click the desired
tab. Change the printer settings, then
click [OK].
For Windows 2000:
Click the desired tab and change the
printer settings.
For Windows XP:
Click [Preferences], then click the
desired tab. Change the printer settings,
then click [OK].
4
Click [Print] or [OK].
L The fax machine will start printing.
Note:
L To load paper, see page 16.
L For details about the paper specifications,
see page 47, 80.
Setting the printer properties
You can change the printer setting in step 3. We
recommend that you test paper (especially
special sizes and types of paper) on the fax
machine before purchasing large quantities.
You can change the settings on following tabs.
Paper: Paper size, paper type, etc.
®
, select
7. Multi-Function Station software
Output: Pages per sheet, etc.
Quality: Graphics mode, resolution, toner save
feature, etc.
Note:
L To select [Envelope] for paper type on the
[Paper] tab, you need to select [Envelope
#10] or [Envelope DL] for paper size.
L When printing from a computer, the toner
save feature on the [Quality] tab overrides
the fax machine's toner save setting (feature
#482 on page 55).
7.4.2 Transparencies
Use transparencies designed for laser printing.
We recommend the following:
®
3M
CG3300/CG5000
L Load transparency sheets one page at a
time for printing, print-side down.
L Remove each transparency after printing
and place it on a flat surface to cool and to
prevent it from curling.
L Do not re-use transparencies that have
already been fed through the fax machine.
This includes transparencies that have been
fed through and ejected without being printed
on.
L Some types of transparencies have
instructions recommending which side to
print on. If the print quality is poor, try printing
on the other side.
7.4.3 Labels
Use labels designed for laser printing. We
recommend the following:
®
Avery
5160/5161/5162/5163/5164/5165/5167/5168
®
XEROX
LWH100/LWH110/LWH120/LWH130/LWH140
L Load label sheets one page at a time for
printing, print-side down.
L Remove each label after printing.
L Do not use the following types of labels:
– Labels that are wrinkled, damaged or
separated from the backing sheet.
– Any sheet of labels that has spaces in it
where some of the labels have been
removed.
47
Advertisement
Table of Contents
