Table of Contents
Advertisement
L Some fax machines do not generate fax
calling tones when sending faxes,
therefore the unit will try to receive a fax
even if no fax calling tone is detected.
Note:
L The auto disconnection code can be
changed in feature #435 on page 58.
L Even when you answer a call with the
extension telephone and press the auto
disconnection code, the fax machine may
activate the fax function depending on the
type of an extension telephone. Press
{STOP} on the fax machine to talk with the
calling party.
4.8 Using the unit with an
answering machine
4.8.1 Setting up the fax machine
and an answering machine
1
Connect the answering machine (1).
L Answering machine is not included.
L Remove the stopper (2).
1
2
Set the number of rings on the answering
machine to less than 4.
L This will allow the answering machine to
answer the call first.
3
Record a greeting message on the
answering machine.
L We recommend you record a message
up to 10 seconds long, and not to pause
for more than 4 seconds during the
message. Otherwise, both machines will
not function correctly.
4
Activate the answering machine.
5
Set the fax machine to the desired receiving
mode (page 35).
L If you set to FAX ONLY mode, change
the ring setting in FAX ONLY mode to
more than 4 (feature #210 on page 54).
6
Check all or part of the following are not the
same:
– the remote access code of the answering
machine
4. Fax
2
37
Advertisement
Table of Contents
