Editing A Caller's Telephone Number Before Calling Back - Panasonic KX-FT932FX Operating Instructions Manual

The display will show the number of new calls in standby
mode.
Example:
{CALLER ID}
{FAX/START}
{MONITOR} (KX-FT932)
{STOP}
{SP-PHONE} (KX-FT938)
1
Press {CALLER ID}.
2
Press {B} to search from the recently received caller
information.
L If you press {A}, the display order will be
reversed.
3
Lift the handset or press {MONITOR} (KX-
FT932)/{SP-PHONE} (KX-FT938) to return the call.
L The unit will start dialling automatically.
L To send a fax, insert the document FACE DOWN
and press {FAX/START}.
To change the way caller information is displayed
Press {CALLER ID} repeatedly after the caller
information is displayed.
Example:
L A Q on the display means the item has already been
viewed or answered.
Display while viewing
L When the unit could not receive a name, the display
will show "NO NAME RCVD".
L When no calls have been received, the display will
show "MEMORY EMPTY".
To stop viewing
Press {STOP}.
10 NEW CALLS
10:59
{A}{B}
SAM LEE
20 Jul. 11:20
,
b
1345678901
20 Jul. 11:20
,
4.6 Editing a caller's telephone
number before calling back
{CALLER ID}
{FAX/START}
{MONITOR} (KX-FT932)
{STOP}
{SP-PHONE} (KX-FT938)
1
Press {CALLER ID}.
2
Press {A} or {B} repeatedly to display the desired
item.
3
Press {CALLER ID} to display the telephone
number.
4
To insert a number in front of the telephone number,
press the desired dial key ({0} to {9}).
L You can also initiate the editing mode by
pressing {*}.
5
Lift the handset or press {MONITOR} (KX-
FT932)/{SP-PHONE} (KX-FT938) to call back the
edited number.
L The unit will start dialling automatically.
L To send a fax, insert the document FACE DOWN
and press {FAX/START}.
Note:
L The edited telephone number will not be saved as
caller information. To store it into the phonebook, see
page 18.
To correct a mistake
1. Press {<} or {>} to move the cursor to the incorrect
number.
2. Press {STOP} to delete the number.
3. Enter the correct number.
To delete a number
Press {<} or {>} to move the cursor to the number you
want to delete and press {STOP}.
To insert a number
1. Press {<} or {>} to move the cursor to the position to
the right of where you want to insert the number.
2. Enter the number.
4. Telephone
{A}{B}{<}{>}
17