Panasonic KX-FP300E Operating Instructions Manual page 6

Quick Start
Installation
Remove the shipping tape from the unit and paper stacker, and install as follows.
Film cartridge
1
A.
Slide the cover open lever forward.
B.
The cover is under tension to improve print
quality. Pull up hard enough to open.
C.
Lift out the film cartridge and remove the leaflet
from the unit.
D.
If the film in the film cartridge is slack, tighten it
by winding the bottom side gears.
Incorrect
E.
Install the film cartridge into the unit.
F.
Make sure that the blue label on the
cartridge matches the one on the unit.
G.
Close the cover securely by pushing
down on both ends.
Blue labels
4
Shipping tape
(p. 25, 26)
Correct
Tight
Blue gear
Shipping tape
Cover
Blue label
Bottom
side gears
Cover open
lever
Leaflet