How Much Film You Have Left; Replacing The Film Or Film Cartridge - Panasonic KX-FP300E Operating Instructions Manual

Ink Film

How much film you have left

To check the amount of remaining film, press
the approximate amount of remaining film.
Display:
FILM E
FILM E

Replacing the film or film cartridge

When the unit detects the end of the film, the following message will be displayed.
Display:
FILM NEAR EMPTY
FILM EMPTY
The following are available for replacement.
KX-FA135X: Film cartridge (1 cartridge and 1 film)
KX-FA136X: Replacement film (2 films)
To order, see page 17.
1
Slide the cover open lever forward.
2
The cover is under tension to improve print quality.
Pull up hard enough to open.
3 Remove the film cartridge.
If you have purchased a film cartridge (Model no.
KX-FA135X) for replacement, go to step 10.
To replace only the film, go to step 4.
4
Unlock the four gears by (
gears (blue and green gears) forward and (
pushing back the bottom side gears (green gears).
Remove the used film.
5
Remove the four gears from the used film cores.
Caution:
The film is not reusable. You can order a new film
for replacement through your nearest Panasonic
dealer.
124
FILM REMAINING
F
When the film indicator points to this position, the remaining film will
F
print up to 20 pages of A4 size documents. Prepare a new film or film
cartridge for replacement.
The remaining film prints about 10 pages of A4 size document.
Prepare a new film cartridge.
The film is empty. Install a new film or film cartridge.
) pulling the top side
A
)
B
while the unit is idle. The display indicates
Film cartridge
Blue gear
A
Top side gears
B
Green
gear
Bottom side gears
Green gear
Gears
Gears
Cover open
lever
Green
gear
A
B
Film cores