Panasonic KX-FP300E Operating Instructions Manual page 116

Error Messages
Display message
PLEASE WAIT
POLLING ERROR
REDIAL TIME OUT
REMOVE DOCUMENT
TRANSMIT ERROR
UNIT OVERHEATED
The following will be shown on the KX-FP320/KX-FM330 only.
Display message
MESSAGE FULL
KX-FM330 only
PC FAIL OR BUSY
114
The unit is checking that there is no slack on the film. Wait a while.
The other party's fax machine does not provide the polling function. Check with
the other party.
The other party's fax machine is busy or has run out of recording paper. Try
again.
The document is jammed. Remove the jammed document (p. 122).
Attempted to transmit a document longer than 600 mm. Press
remove the document. Divide the document into two or more sheets and try
again.
A transmission error occurred. Try again.
The unit is too hot. Let the unit cool down.
There is no room left in memory to record a voice message. Erase some or all of
the messages (p. 98, 104).
The fax function cannot be operated by the PC. The RS232C cable is not
connected correctly, or the software is not running on the PC.
Cause & Remedy
Cause & Remedy
STOP to