Konica Minolta 7255 Instruction Manual page 336

Transmitting/Editing Machine Setting File (Environment Setup) (contin-
5.
Edit the machine setting file.
The machine setting file transmitted to a PC is a TAB separated text file
which can be edited using an application software such as Text Editor or
Table Editor. A new setting file can also be created according to the
specifications for each file type. See p. 10-57 to p. 10-58 for details.
6.
Import the machine setting file.
Click on [Browse] to designate the machine setting file to be imported, then
click on [Import].
The result message will be displayed when the registration is completed.
If the registration cannot be completed successfully, error messages will
be displayed as follows.
• Can't transfer data (The machine is busy)
• The data cannot be recognized
• Data size is too large
• The data cannot be registered
10-56
DETAILS: Error Message
Try again to import the data after the machine operation in
progress is completed.
Confirm that the data is the machine setting file.
Confirm that the data is the machine setting file.
Check if the file size exceeds 100,000 bytes.
Check if inappropriate description is made in the machine setting
file. See p. 10-57 to p. 10-58 for details.
Check if the file entries are already over the limit.
ued)