Other Options - Panasonic KX-TCD200G Operating Instructions Manual

TCD200G(e-g).book Page 25 Tuesday, February 8, 2005 8:57 AM

Other options

Changing the base unit PIN (Personal
Identification Number)
For security, the base unit PIN must be entered
when changing certain settings. The default PIN
is "0000".
Wichtig:
L If you change the PIN, please make note of
your new PIN. The unit will not reveal the PIN
to you. If you forget your PIN, consult your
nearest Panasonic service centre.
1
Press {j/OK}.
2
Select "Basis-Einstell.", then press
{>}.
3
Enter "0000" (default base unit PIN).
L If you changed the PIN, enter it.
4
Select "Andere Optionen", then press
{>}.
5
Select "Basiseinh. PIN", then press {>}.
6
Enter the new 4-digit base unit PIN, then
press {j/OK}.
7
Press {ih}.
Resetting the base unit to its default
settings
1
Press {j/OK}.
2
Select "Basis-Einstell.", then press
{>}.
3
Enter "0000" (default base unit PIN).
L If you changed the PIN, enter it (Seite 25).
4
Select "Andere Optionen", then press
{>}.
5
Select "Basis Zurückst.", then press
{>}.
6
Select "Deutschland", then press {>}.
7
Select "Ja", then press {>}.
8
Press {ih}.
Hinweis:
L The following items will be deleted or reset to
their default settings:
– Settings listed on Seite 21
– Caller list
Base Unit Settings
L The following items will be retained:
– Date and time
– Repeater mode
L If you select "Österreich" as the country in
step 6, the following default settings will be
changed for Austria:
– Recall time
– Emergency number
If you select "Österreich" in step 6 by
mistake, repeat this procedure and select
"Deutschland" in step 6.
L After resetting the base unit, you will not be
able to make or receive calls for a few
moments.
25