Answering Calls - Panasonic KX-TCD200G Operating Instructions Manual

TCD200G(e-g).book Page 11 Tuesday, February 8, 2005 8:57 AM
6
Select the desired category (Seite 13), then
press {>}.
7
Select "Speichern", then press {>}.
8
Press {ih}.
Other features
Voice enhancer
You can change the tone quality of the receiver
while you are on a call. 3 settings are available.
1
Press {j/OK} during a call.
2
Select the desired setting, then press {>}.
Hinweis:
L If you select "Höhen" or "Tiefen", "[VE]" is
displayed.
Mute
You can mute your voice during a conversation.
While mute is turned on, you will be able to hear
the other party, but the other party will not be able
to hear you.
1
To mute your voice, press {C/T}.
2
To return to the conversation, press {C/T}
again.
Key lock
The handset can be locked so that no calls or
settings can be made. Incoming calls can be
answered, but all other functions are disabled
while key lock is on.
To turn key lock on, press {j/OK} for about 2
seconds.
L "[X]" is displayed.
L To turn key lock off, press {j/OK} for about 2
seconds.
Hinweis:
L Calls to emergency numbers (Seite 23) cannot
be made until key lock is turned off.
L Key lock is turned off when the handset is
turned off.
R button (to use the recall feature)
{R} is used to access special telephone services,
such as call waiting. If your telephone line
supports call waiting, you can press {R} to switch
between the first and second caller during a
Making/Answering Calls
conversation. Contact your service provider for
details.
Hinweis:
L If your unit is connected to a PBX (private
branch exchange), pressing {R} can allow you
to access certain features of your host PBX
such as transferring an extension call. Consult
your PBX dealer for details.
L You can change the recall time (Seite 23).
Pause button (for PBX/long distance service
users)
A pause is sometimes required when making
calls using a PBX or long distance service.
Example: If you have to dial {0} before dialling
outside numbers manually, you will probably
pause after dialling {0} until you hear a dial tone.
1
Press {0}.
2
Press {R}.
3
Dial the phone number, then press {C} or
{s}.
Hinweis:
L Pressing {R} 1 time creates 1 pause. Press
{R} repeatedly to create longer pauses. To
change pause length, see Seite 23.

Answering calls

1
Lift the handset and press {C} or {s} when
the unit rings.
L You can also answer a call by pressing any
dial key from {0} to {9}, {*}, {#}, or {INT}.
(Any key answer feature)
2
When finished talking, press {ih} or place
the handset on the base unit.
Auto talk feature
You can answer calls simply by lifting the handset
off the base unit. You do not need to press {C}.
To turn this feature on, see Seite 19.
To adjust the ringer volume when an outside
call comes in
Press {e} or {v} when an outside call comes in.
11