Appletalk Configuration; Enabling Appletalk - Konica Minolta 7145 Instruction Manual

5-5. AppleTalk Configuration

From this page an administrator can configure AppleTalk. All these functions are password protected.
In order to alter any of the fields that follow, a password is required. The default password for Web Utilities is "key
operator password"
To access the AppleTalk Configuration page, follow these steps:
1
Open the Network Setup page.
2
From the top menu, select AppleTalk Configuration. The AppleTalk Configuration page
opens.

Enabling AppleTalk

This check box toggles the network interface card between disabled and enabled.
To enable AppleTalk, follow these steps:
1
Open the AppleTalk Configuration page.
2
Click the Enable AppleTalk check box.
Should you wish to disable AppleTalk, deselect the option box.
3
At the bottom of the page, type in the system password in the provided field.
4
Click [Apply].
II Network Setup - Administrators only
Chapter 5 Web Utility
86