Ip Address Settings - Konica Minolta 7145 Instruction Manual

6
Select the item to set by touching it.
7
Set each item and when setting of all the items is complete, touch the [OK] key.
→ The display returns to the [Network setting] screen.
Touching [CANCEL] will return you to the [Network setting] screen without any of the changes taking effect.

IP Address Settings

There are two methods for setting the IP address etc. for the network controller.
Assigning the IP address automatically with the DHCP server
When managing IP addresses with a DHCP server on the network, there is no need to set a unique IP
address for the network controller. The IP address can be assigned automatically from the DHCP
server.
Setting a unique IP address for the network controller
When setting individual IP addresses for equipment connected to the network, the IP address assigned
to the network controller is manually input. In this case, it is also necessary to set the sub-net mask and
other information with manual input.
For details on management methods for network IP addresses etc., check with your network administrator.
For details on making network settings manually, check with the network administrator.
When making network settings manually, in addition to the method explained here using the control panel, you can
also use a web utility. For details, refer to the Web Utilities user's manual.
4-2. Method for Setting Network from Control Panel
25
Chapter 4 Setting from the Control Panel
II Network Setup - Administrators only