Zone Name - Konica Minolta 7145 Instruction Manual
Network setup and scanner operations
Hide thumbs
Also See for 7145:
- Internet fax / fax operations (453 pages) ,
- Service manual (448 pages) ,
- Instruction manual (324 pages)
Table of Contents
Advertisement
4-5. AppleTalk Setup
Zone Name
This specifies the zone that the print controller is connected to.
1
Touch the [Zone Name] key.
2
Using the data input screen, input the Print Name.
3
Touch [OK] key.
The Zone Name should not exceed 32 characters.
For details on character input, refer to [Chapter 3 Inputting Text] (
If there is no zone (when using a network with no shielded router), leave this column blank.
Touching [OK] will return you to the [Network setting] screen.
Touching [CANCEL] will return you to the [Network setting] screen without any of the changes taking effect.
II Network Setup - Administrators only
Chapter 4 Setting from the Control Panel
42
Page 15).
Advertisement
Table of Contents
